Announcement

Collapse
No announcement yet.

NM-A752 no power

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    NM-A752 no power

    have nm-a752 motherboard with no power input mosfet gate voltage is missing charging ic is bq24780s input both mosfets are ok charging ic has
    vcc 19v
    acdet 2.86v
    regn 6v
    but acok is 0v.

    schematics link is here https://www.badcaps.net/forum/attach...6&d=1599240006.

    removing pr301 all voltage is ok and i get 19v on one side of pr301
    Last edited by ahmarzo; 09-09-2023, 07:03 AM.

    #2
    Re: NM-A752 no power

    Remove all power. Measure the resistance to ground on the pcb side that is without the 19v. Leave pr301 off the board. What is the resistance?

    Comment


      #3
      Re: NM-A752 no power

      pr301 pch side resistance is 1 mega ohm

      Comment


        #4
        Re: NM-A752 no power

        Put the resistor PR301 back to its place and measure the voltages to ground on all pins of battery connector with the power supply + battery connected.

        Comment

        Working...
        X