MacBook Pro 2019 A2141 820-01700 NAND Issue Stuck in DFU

Ok, here's an issue ive got on a A2141 820-01700 MBP 16' 2019. No signs of life, 5.06v 0.0a on usb-c meter, on each 4 usb-c ports.

Nand voltages are missing.

I've found no shorts at all so far, no signs of heat via thermal camera either.

PPBUS_G3H 12.31
PP3V3_G3H_RTC 3.387v
PP3V3_G3H 12.31v
PP2v5_NAND_SSD0 0v 58 ohms
PP2v5_NAND_SSD1 0v 57.8 ohms
PP1v8_SLPS2R 1.8v
PP1v1_SLPS2R 1.1v
P3V3_G3H_SOCPMU 3.37v
PP0V9_SLPDDR 0.9v...

hi

i whant unlock macbook pro A1932 2019 whit ibridge 9,3 ;

i change efi files find on files mina T2 activator 1,4 and use for activation mina T2 activator 1,3 , but fault ssh?

i use mina T2 ramdisk activator 1,0 and 3,0 . but whon t work ?

have you other programme or method compatible whit this macbook ibridge 9,3 for bypass ?

I need help or information?

Does anyone have the minat2 activator 1.4 software?

Or did they use it for bypass macbook air 2019 a1932 with new ibridge 9.3?

Thank yo...

I need dump file for nand A2159 512GB with 2 Nand chips >.I upgraded 128gb to 512gb..I use P13 there are only 4Chips...
I need dump file MACBOOK PRO A2159
TSB4232(256)
TSB4229(256)
Thanks​

Hello people. I have undertaken an upgrade from 256GB to 512GB. I have another A2681 board that I sourced NANDs, resistors and capacitors from. Yet when I try to restore the firmware in FDU mode I get the error 0x23 (35) (error formatting the NAND). Could it be the faulty NAND or I have missed something? Thank you...

Hi all dear friend., today I am working on 820-01521-A logic board (MacBook Air A1932 2019) stuck on 5V .19 milliamps. The history of this logic board was liquid spill on major components. First gave a good cleanup & both CD3215C00Z were getting very hot, so I replaced both. Now on the 12V coil, there is only 5v present & 3.3V is perfect. In some area like PPVIN_G3H_P3V3G3HRTC , PPBUS_G3H_TPAD etc., 12V is perfect. On the 5v coil .2 volts only. I checked the enable signal on the regulator chip, enable is NOT present. The logic board is very clean, I do not see any signs of spill anymore....