Announcement

Collapse
No announcement yet.

Alienware 17 R2 (P43F001) no display

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Alienware 17 R2 (P43F001) no display

    Hi,

    i have this Alienware 17 R2 that turns on but gives no display, i connected it with an other screen to see if it gives any display and nothing.

    I don't know what to do to find what is the problem :/

    #2
    Re: Alienware 17 R2 (P43F001) no display

    without display does it beep?
    without display with hdmi u have picture?
    withour ram does it beep ?

    Comment


      #3
      Re: Alienware 17 R2 (P43F001) no display

      Ok so no beep, nothing BUT the screen turns on, i have a beep when i unplig the battery and replug it.
      So could it be a problem with the vbios or bios ? i'm clueless here...

      Comment


        #4
        Re: Alienware 17 R2 (P43F001) no display

        many 17 r2 get dead with shorted cpu mosfet, but to check that u sould disassembly whole mainboard.

        before that did u try reset cmos battery ?
        withour ram does it beep ?
        if without ram no beep can be bad bios, bad pch or bad cpu.

        Comment


          #5
          Re: Alienware 17 R2 (P43F001) no display

          My bad, without ram it does 2 beeps and loop !
          And apologies but the laptop show no display, it's an other computer that shows a display ^^'
          Currently i have 2 beeps without ram, i'm reseting the cmos battery now, and i will try to restart it
          Last edited by Garibean; 07-17-2023, 08:43 AM.

          Comment


            #6
            Re: Alienware 17 R2 (P43F001) no display

            cpu vcore? present ?

            Comment


              #7
              Re: Alienware 17 R2 (P43F001) no display

              The vcore is at the end of the big coils next to cpu ? (where the cpu mosfet are)

              I have 1.7v vcore at the end of the coils (between the cpu and the coils)

              are there any schematics for this old alienware ?
              Last edited by Garibean; 07-17-2023, 09:14 AM.

              Comment


                #8
                Re: Alienware 17 R2 (P43F001) no display

                schematic should be available. check for board code like la-xxxx. if u can try other bios , maybe already posted here.

                Comment


                  #9
                  Re: Alienware 17 R2 (P43F001) no display

                  I tried this method to flash the bios

                  https://fr.alienwarearena.com/ucf/sh...-update-failed

                  But it does not work, the laptop turns on and after a minute or two it reboots, i guess i have to flash it with a chk341a

                  Comment


                    #10
                    Re: Alienware 17 R2 (P43F001) no display

                    Ok little update, i flashed the bios, it looked like it worked with the chk341a.
                    Now i have 7 beeps (CPU failure), so cpu is down i guess but with no short on the mosfets, strange...

                    What else could it be ?
                    Last edited by Garibean; 07-18-2023, 10:02 AM.

                    Comment


                      #11
                      Re: Alienware 17 R2 (P43F001) no display

                      try remove cmos battery. then power on. it shoul beep 5 timers. power off then power on again and see if it still beep 7 times.

                      Comment


                        #12
                        Re: Alienware 17 R2 (P43F001) no display

                        So i tried what you said, the laptop turned on 3 times, beeped 5 times then beeped 7 times

                        Comment


                          #13
                          Re: Alienware 17 R2 (P43F001) no display

                          I started to search around the mosfets of the cpu but i don't know how to interpret these values, the mosfets are double mosfets, i don't really know how these works but i got some values :

                          PQ505 & 506

                          G1 to GND : 3k to 5k
                          D1 to GND : 460 ohms
                          S1 to GND : 17 ohms
                          G2 to GND : 30k
                          D2 to GND : 17 ohms
                          S2 to GND : 0 ohm

                          PQ503 & 504

                          G1 to GND : 315 ohms
                          D1 to GND : 460 ohms
                          S1 to GND : 17 ohms
                          G2 to GND : 30k
                          D2 to GND : 17 ohms
                          S2 to GND : 0 ohm


                          PQ501 & 502

                          G1 to GND : 480 ohms
                          D1 to GND : 460 ohms
                          S1 to GND : 17 ohms
                          G2 to GND : 30k
                          D2 to GND : 17 ohms
                          S2 to GND : 0 ohm


                          SCHEMATICS : https://www.badcaps.net/forum/showpo...33&postcount=1

                          Comment


                            #14
                            Re: Alienware 17 R2 (P43F001) no display

                            mosfet values are ok. u have all s0 volts except cpu vcore?

                            are u sure bios and ec are ok ?

                            Comment


                              #15
                              Re: Alienware 17 R2 (P43F001) no display

                              I don't know how to verify the state of the bios and EC, i just reflashed the Bios, but i don't have a EC programmer :/

                              Comment


                                #16
                                Re: Alienware 17 R2 (P43F001) no display

                                Any ideas ?

                                Comment


                                  #17
                                  Re: Alienware 17 R2 (P43F001) no display

                                  ec bios is a 8 pin chip. ec bios and bios must be both ok to make it work.

                                  that kind of problem could also be pch that need to be reballed.

                                  Comment


                                    #18
                                    Re: Alienware 17 R2 (P43F001) no display

                                    Originally posted by Garibean View Post
                                    So i tried what you said, the laptop turned on 3 times, beeped 5 times then beeped 7 times
                                    If you still get 7 beeps you must test the LPC_AD0 LPC_AD3 LPC_AD2 LPC_AD1 signal with the help of oscilloscope near SIO

                                    Comment

                                    Working...
                                    X