820-01814 strange USB activity

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • samolo75
    Senior Member
    • Oct 2020
    • 67
    • spain
    #21
    Re: 820-01814 strange USB activity

    I connected extracted the content from UB090 and attach it here. I compared it with the files I found here in the forum and they don't seem to have the same content. Shouldn't they being the same? I just wonder if it is save to write the file to the rom and install it. Sizes of the files are identical, at least
    Thanks in advance

    EDIT. I deleted the files from this post and added them to the BIOS Request only channel.
    Last edited by samolo75; 06-03-2023, 04:18 AM.

      Comment

      • samolo75
        Senior Member
        • Oct 2020
        • 67
        • spain
        #22
        Re: 820-01814 strange USB activity

        Well, I did flash the UB090 just in case, and no changes, works the same as before.

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • Stephen
            A1989 Logic Board Repair Issue. One CD3215 chip is the culprit
            by Stephen
            As the title states, got one CD3215 chip being a complete butthole to me. All readings on the other 3 chips read as follows
            5.16V .47amp
            5.16V .47amp
            5.16V .47amp
            5.16V .04amp (this guy is the issue) (U3200)

            So I went ahead and replaced the chip, (actually 3 times with 3 new CD3215 chips) all same issue, at first it wasn't reading at all then it finally started reading. I can rest assured is it not the CD3215 chip now but something else is causing this port to not fully read (god I wish the board would just turn on so we can just recover the data)
            ...
            11-27-2023, 03:57 PM
          • Cemal Odabasioglu
            MacBook Pro A1707 Motherboard Diagnostic Help – CD3215 heating and Fluctuating Rails
            by Cemal Odabasioglu
            Hello everyone,

            I'm currently diagnosing a MacBook Pro A1707 motherboard that does not power on. I've gathered some data but am stuck and need expert advice.
            Note that i'm a beginner in electronics and i'm trying to learn while trying to repair this macbook that my work gave me. I'm really curious and love understanding how thing works and i already learned so much.

            Only one usb c port is taking 20v and have 12.5v on PPBUS_G3H. when trying other ports, 2 are not going to 20v and one is going to 20v but the CD3215 is getting really hot.

            Observations...
            01-14-2025, 03:54 PM
          • Raven7032
            Dell G15 Ryzen Edition (LA-K454P) – No SPI Activity, No Boot, No startup
            by Raven7032
            Hello everyone!
            Stucked with this problem.
            Model: Dell G15 Ryzen Edition
            Board: GDL LA-K454P
            Symptoms:
            • Board powers on (consumption ~0.5A), but no boot or display.
            • Fans spin briefly, keyboard backlight turns on, then fans stop.
            • Can be shut down via power button (EC active).
            • No POST, no BIOS splash, no backlight.
            • Led is blinking 2 orange 1 white
            • No activity on SPI bus (no CS#, no CLK, no MOSI/MISO) even after pressing power.
            • No APU_PCIE_RST# - 0V
            Measurements:
            • All voltage rails present: +1.8V, +0.75V, +3VS, +5VS, VDDCR_VDD, VDDCR_SOC, DDR VDDQ, VTT.
            • EC_RSMRST#
            ...
            06-26-2025, 11:47 PM
          • survivalbloke
            Acer Predator Helios 300 - will not power up if battery is CONNECTED
            by survivalbloke
            This was a no power initially. Thanks to your help, I discovered it was the first mosfet, so I replaced. Now, the device will power up only if the battery is NOT connected. As soon as I connect the battery, it shuts off. If I connected the battery while the device is off, it simply will not respond to the power button. I replaced the battery, and while I suppose the new battery could be faulty, I'm assuming it is not. I'm having the same behavior with the new battery. I measure .2v at the charging coil. Manually applying power to the + and - at the battery header, there is no charging happening....
            06-25-2025, 12:20 PM
          • muhuruu
            PS5 too many USB devices connected
            by muhuruu
            Hello. I have a problem with a PS5 console that I bought to learn electronics repair. The auction description indicated that the console had been dropped. The HDMI port and USB ports were damaged. The HDMI port was replaced by the previous owner, and after his repair, the console worked for 2 days and then became dead. After receiving the console, I replaced all the USB ports. After replacing them, the console started to turn on. On the logo screen, it displays "too many USB devices connected". My further attempts to fix the error involved replacing the Southbridge, 4 TPS2001D chips,...
            05-19-2025, 07:14 AM
          • Loading...
          • No more items.
          Working...