So I got a 360 off of ebay for like $5. The seller said that he doesnt have a power brick to test it out (which I highly doubt honestly) but I got it anyway. It's a launch console in mint condition. Tried powering it on, rrod after 30 seconds error code 0022... opened it up and it looked alright til I pulled the mobo out... somebody stabbed the board with a screwdriver... and its on the gpu - memory bus... should I try repairing it or is it a waste of time?
Announcement
Collapse
No announcement yet.
Old 360 trace repair
Collapse
X
-
Re: Old 360 trace repair
Probably. At first those things are a pain in the a$$ to remove. But after removing em dozens of times they come off pretty easily. I actually damaged a board whilr removing an x clamp. It was an old zephyr. Still worked tho. Opened it up to change the thermal paste and while I was removing the gpu x clamp my screwdriver slipped and ripped like 10 of those little smd caps under the southbridge. Surprisingly the thing still worked afterwards but boot times were pretty messed up. Sometimes it took over a minute to boot.Last edited by nick122; 08-22-2018, 04:22 PM.
Comment
Comment