WD My Book Duo (Blue Rings)
Model Number: WD10000D033
Long story short, I accidentally plugged in the wrong power adapter to this NAS device. It started to have a burn smell, so I took it apart and found a burnt chip. Replaced the burnt chip, but still the device will not power up. The chip is a APM4532.
Now when I plug in power, I get a quick power light flash and then it goes out. I'm attempting to power it up without any drives attached. I have a second one of these, exact model, to reference. Using the proper, original Power Adapter now as well.
Would anyone have any recommendations on where to begin further troubleshooting? I appreciate any assistance anyone can offer.
Pictures attached of the board. If a different angle or a closer picture would help, just let me know.
Thanks!
Model Number: WD10000D033
Long story short, I accidentally plugged in the wrong power adapter to this NAS device. It started to have a burn smell, so I took it apart and found a burnt chip. Replaced the burnt chip, but still the device will not power up. The chip is a APM4532.
Now when I plug in power, I get a quick power light flash and then it goes out. I'm attempting to power it up without any drives attached. I have a second one of these, exact model, to reference. Using the proper, original Power Adapter now as well.
Would anyone have any recommendations on where to begin further troubleshooting? I appreciate any assistance anyone can offer.
Pictures attached of the board. If a different angle or a closer picture would help, just let me know.
Thanks!
Comment