Golden Tee 98 Display

[VoicesFYC]

always check Ebay..most monitor dealers sell part there for us guys who restore arcade machines

[dcapper]

Thanks for all the help. I ended up putting in a lcd tv. I ordered a flyback but it didn't work. That's what I get for ordering one from China.

[VoicesFYC]

welp..i guess i should pipe in here...i'm a 41+yr Arcade tech with about 2TB of game manuals..so if ya need something just pop me a message... just not a fan of golf games...lol ..P.S replacing the flyback is a normal thing... you can find them on ebay or whatever arcade parts place ya like. Daniel.

[stj]

Re: Golden Tee 98 Display

repl;ace the transformer and any caps rated 100v or higher

[dcapper]

Re: Golden Tee 98 Display

I just bought an Amazon one and installed it today. I put in a 26" lcd tv in the cabinet and it works great. So would I need a new flyback and recap?

[stj]

Re: Golden Tee 98 Display

the flyback in wells-gardner and hantarex monitors is known to fail,
it's not the hole thats the problem, it's the shorted windings inside - the hole is just a side-efect of the heat from arcing.
a new transformer will 99% fix it - a few caps will complete the repair.

what converter did you get? a GBS8200/8220?

[dcapper]

Re: Golden Tee 98 Display

I ended up buying a converter and am putting a lcd in the machine. Another question please. Would the flyback cause this on the screen. Don't mind the black, that's my phone I think. I siliconed the flyback temporary to see if it would get better and it didn't. Oh the number on the flyback is TLF09-04

[dcapper]

Re: Golden Tee 98 Display

more pics

[stj]

Re: Golden Tee 98 Display

if the transformer is arcing then replace it - check the number stamped on it.
it doesnt look like a k7000

[dcapper]

Re: Golden Tee 98 Display

It's a k7000. So would it be safe to replace the flyback and recap it? I think the part number is BSC25-0146

[dcapper]

Re: Golden Tee 98 Display

I added pics. I watched a youtube video and my board doesn't look like the 2000 or 7400 or 7500. Would be stamped somewhere if I pull it out of the unit?

[dcapper]

Re: Golden Tee 98 Display

I searched the net and it says the u2000 was a common problem and to replace it with a k7000 or k7400. So would I just need to replace the flyback transformer?

[stj]

Re: Golden Tee 98 Display

it looks like a wells gardner chassis - not sure the model but it should be a "U2000" from the manual

[dcapper]

Re: Golden Tee 98 Display

I added some pics. Notice the arcing. I wonder if I can get the video board. I can't much for part numbers on it besides whats in the pics.

[stj]

Re: Golden Tee 98 Display

there is no power board,
the chassis board handles the power and deflexion,
the small board on the tube neck does the colours

[dcapper]

Re: Golden Tee 98 Display

Thanks for the quick reply. I'm just out but I can take a look when I get home. The power board for the screen is humming pretty good.

[stj]

Re: Golden Tee 98 Display

it's the monitor - focus is out
try ajusting the focus control on the high voltage transformer.
does the chassis have a make/model marked on it?

[dcapper]

I acquired this Golden Tee 98 and the screen isn't working. Before I throw money at this thing. By the pics would you think it's the video board or the crt?