Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
for the heck of it..i decided to look for info on the problem and found this posting on another site... it would be wise to read it completely ... it MIGHT be a clue [url]https://gearspace.com/board/so-much-gear-so-little-time/463238-troubleshooting-samson-txm16-1000w-problem-amps-protection-circuit.html[/url]
Daniel.https://for the heck of it..i decide...uit.html[/url]
Leave a comment:
-
I was Reading the posts in here.. and mostly i keep to myself unless i have info on a listed subject... i do NOT own a Bob Parker ESR meter but i do remember many years ago when i was a young arcade tech learning monitor repair and board repair and trying to keep 157 arcade machines running damn near 24/7 ..i remember my electronics school had posted an article that i think was from some electronics magazine that talked about that meter. and i was quite impressed because they had used the Dick Smith Article and after reading it i wanted one but every time i wanted to get one it was out of stock...
Leave a comment:
-
-
always check Ebay..most monitor dealers sell part there for us guys who restore arcade machines
Leave a comment:
-
-
forgive me for my backwards logic on this subject..... if it was me..i'd EBAY look for a Non-working 2080 card and use the damaged one for one from Ebay and then troubleshoot the one from ebay and use the parts from the dropped card....i just KNOW it would be cheaper my 2 cents Daniel.
Leave a comment:
-
the Official Answer ... is YES...You Can and sometimes with a varable temp hairdryer you can find the temp issue faster Daniel.
Leave a comment:
-
my 2 cents worth.... i've been repairing circuit boards for over 41 yrs... mostly PC motherboards & Arcade machine motherboards... most of what i use is a large kitchen sink... a soft bristle paint brush.. a bottle of Dawn Dish soap , a portable mini vac with hose. and a 1500 watt hairdryer with hi/low . ..
first... i remove ANY batteries on any board. then i inspect for any components that could be damaged by hot water.. 99.9% of the time your components are hermetically sealed... after pre-wash board inspection... i lay the "Motherboard " in the empty sink and start hot...
Leave a comment:
-
For Proper cloning ..use HDD Regenerator or AOMEI partition Assistant unlimited edition 8.8 or higher. and for all your HP Software you'll need... [url]https://support.hp.com/us-en/drivers/hp-designjet-t790-printer-series/5053926[/url]https://For Proper cloning ..use HDD.../5053926[/url]
Leave a comment:
-
Eccerr0r... i hope you end up feeling better... i wasn't sure if the schematics i found was gonna help..but the site i had found them on listed that radio chassis for at least 12 other radios... i gather there is some minor changes for each radio..but they claim they are all the same...so thats whi i grabbed what i could in the Meantime i hope everyone has a nice christmas... i used to have one but i'm seperated pending divorce and right now the only thing keeping me sane is keeping myself busy even with small stuff but i hope everyone has a nice holiday just the same
Leave a comment:
-
Psst...don't tell stj i said this but i found out he likes peanut butter and jelly on his toast ...
Leave a comment:
-
after scouring the internet and getting alot of deadends ...i found a site that had info and this radio was designed in GERMANY and sold under a TON of names... the website is a lil sketchy so make sure your AV software is updated disregard the MODEL of the Radio...the Chassie is supposed to be the same over 12 brands... so here is the link i got for one of the models that listed the Schematic... not gonna promise it's the same but from what i read ..it's supposed to be..take that with a grain of salt here ya Go [url]https://www.cbradio.nl/dragon/Schematic_Dragon_SS485_ENG.pdf[/url]...
Leave a comment:
-
welp..i guess i should pipe in here...i'm a 41+yr Arcade tech with about 2TB of game manuals..so if ya need something just pop me a message... just not a fan of golf games...lol ..P.S replacing the flyback is a normal thing... you can find them on ebay or whatever arcade parts place ya like. Daniel.
Leave a comment:
-
welp..guess i was late in my reply...LOL Kudo's to Redwire for an Outstanding Picture he posted for that meter and the resistors 2611 & 1001 are the resistors...sorry i didn't get a chance to respond sooner. but those are the correct ones yes 5 STARS to RED for the photo Daniel.
Leave a comment:
-
hiya Tib i found the SMD resister for your fluke... and they are pretty cheap [url]https://www.newark.com/nic-components/nrc-as100f2611trf/res-2k61-1-1w-2512-thick-film/dp/52AH3180[/url] the SMD resistor is a 2611 . so you can get it there or where ever you order yer parts i tried checing the internet for your projector service manual and as far as i can tell if JVC made a manual..it ain't released for the general repair community yet but i will keep looking hope this helped and if i was you i'd buy spares of the resisters Daniel.hiya Tib i found the SMD resister
Leave a comment:
-
not sure if this will help... but since i'm pretty good with fluke meters from time to time i went looking for a service manual.... welp good luck with that...i don't think fluke made one..or if they did it is in-house ONLY... but i did come across something that MIGHT help... just not totally sure so i will post it here... BE ADVISED it's Both Chinese and English...so don't shoot me over it....it's all i could find on the 187 & 189 fluke meters . hope this does some good . Daniel. [URL]https://www.eevblog.com/forum/repair/fluke-187189-repair/?action=dlattach;attach=1054516[/URL] ...
Leave a comment:
-
Re: iBuyPower series I model 301 case
it could be one of two things.. it's an additional power supply for the board OR the USB allows software to control color and sequence of the LED strips
Leave a comment:
No activity results to display
Show More
Leave a comment: