please help me for identy caps ps4 pro firmware 8.03

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pasdebip
    Member
    • Jun 2018
    • 30
    • france
    #1

    please help me for identy caps ps4 pro firmware 8.03

    Good morning,
    Could you if you know them give me the values if you know them of the capacitors that I surrounded it is to save a ps4 pro in firmware 8.03.
    They are right next to the 12v and 5v connectors
    Thank you and I hope you will be of great help to me.
    Tags: None
    • aktinson
      PS Lover
      • May 2023
      • 18
      • Bulgaria
      #2
      Re: please help me for identy caps ps4 pro firmware 8.03

      were you able to identify?

        Comment

        • pasdebip
          Member
          • Jun 2018
          • 30
          • france
          #3
          Re: please help me for identy caps ps4 pro firmware 8.03

          no Unfortunately

            Comment

            Previous template Next

            Related Topics

            Collapse
            • momaka
              Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
              by momaka
              I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

              For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

              https://www.badcaps.net/filedata/fetch?id=3591771


              https://www.badcaps.net/filedata/fetch?id=3591772

              It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

              https://www.badcaps.net/filedata/fetch?id=359177...
              03-12-2025, 03:42 PM
            • eryjus
              Heathkit IO-4205 Power Supply Caps
              by eryjus
              Hello,

              First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

              I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

              I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
              ...
              05-10-2023, 11:21 AM
            • Paxman_Swede
              Identifying caps on an old Zoom 9000
              by Paxman_Swede
              Hello!

              I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

              The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

              I have studied the board and...
              01-14-2025, 09:51 AM
            • TheUser
              Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
              by TheUser
              Hello to everyone ,

              This is my first post here, and i would like to share with you a small story in case you can help me.

              Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

              All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

              I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
              02-10-2024, 02:07 PM
            • zklgfs
              Anker SoundCore 2 Bluetooth Speaker Turns Off After a Few Seconds (Possibly Firmware Issue?)
              by zklgfs
              Hi,

              I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...
              08-11-2025, 02:14 PM
            • Loading...
            • No more items.
            Working...