Does anyone have a boardview or schematic for the PNY GTX 1060 CG 6GB (BLOWER STYLE ) ?
I've been searching a while I am not able to find anything.
Thanks,
I've been searching a while I am not able to find anything.
Thanks,
-
I am searching for Schematic and/or Boardview for Lenovo T14s Gen4, Board: KT4D5 NM-F221
This one is with Nuvoton NPCX997KAABX EC.
I was only able to locate one for a Version with MEC1723 Chip, but this is not the one I need.
I would buy it, if I knew a site selling it, but I just can´t find it.03-24-2025, 08:33 AM -
Hello there everyone,
I have been trying to repair these 2 different cards that are both 1060 same design by Zotac. I was wondering if anyone on the forum has a schematic or board view for this model. Both cards power on but no post and GPU fan turns off right away. Any help would be great, trying to get one of these to revive for my kids computer to work with Fortnite.
Thanks,
Jeremy01-10-2025, 06:21 PM -
Hi
My Lenovo laptop doesn't turn on.So I need schematic and boardview ,please
Thank you in advance -
NVIDIA GeForce GTX 1060 6GB Schematic & Board View
The GeForce GTX 1060 6 GB was a performance-segment graphics card by NVIDIA, launched on July 19th, 2016. Built on the 16 nm process, and based on the GP106 graphics processor, in its GP106-400-A1 variant, the card supports DirectX 12. This ensures that all modern games will run on GeForce GTX 1060 6 GB. The GP106 graphics processor is an average sized chip with a die area of 200 mm² and 4,400 million transistors. It features 1280 shading units, 80 texture mapping units, and 48 ROPs. NVIDIA has paired 6 GB GDDR5 memory with the... -
hello firends
i search the schematic or boardview
I have this motherboard, but I can't find the schematic or the boardview.
The problem is that on the chip marked where 3V should be, there are 5 volts, which indicates that the two are connected.
So the computer doesn't turn on, and the 3V disappears after a few seconds.
The original problem was that when I turned off the computer, the fan stayed on and saw that it was bad since it was directly in the 5V area.
The new problem arose after removing the bad chip.
3V and 5V remained together,...08-19-2025, 08:25 PM
Comment