Ok, found the schematic and boardview on paid site, sharing it here, as it is very hard to find them.
-
I don't provide help for people using CH341A and a clip. -
Re: Asus RTX 2070 RTX2070 SUPER X 8G GDDR6 schematic
do you know wich chip eeprom it uses for the evga 2070 xc ultra
i think mine was repaired with the wrong one
or maybe bad memory on board
just checking since i looked at the schematic couldnt find the eeprom name?
-
Thermal pad thickness for various laptop GPU / Graphics Cards
ASUS Dual RTX 2070 OC 8GB
ASUS ROG STRIX RTX 3080 OC
ASUS ROG STRIX RTX 3090
ASUS TUF Gaming RTX 3080 OC Edition
ASUS TUF GTX 1660 S-O6G GAMING
EVGA RTX 3060 Ti XC GAMING 8GB
EVGA RTX 3060 XC GAMING 12GB GDDR6
EVGA RTX 3080 FTW3 ULTRA GAMING
EVGA RTX 3080 TI FTW3 ULTRA GAMING
EVGA RTX 3090 XC3 ULTRA GAMING 24GB
Gainward RTX 2080 Phoenix GS Specs
Gainward RTX 3070 Phoenix 8GB
Gainward RTX 3080 Ti Phoenix
GIGABYTE AORUS RTX 3080 MASTER 10G
...02-09-2024, 08:08 AM -
GeForce RTX 2070 SUPER GAMING X (RTX2070) Graphic Card Schematic...10-31-2024, 02:55 AM
-
Hi
Does anybody have the boardview for an Asus Dual RTX 2070 Super?
The PCB unfortunately doesn't follow the reference PCB. My main concern is the rail sequencing.
I had a bad powerstage but after removing it and putting 3.3V directly to the CSD95481RWJ enable pin I get 0.8v on the core.
I have 3.3v form the pcie slot and 5v from the buck converter but that's where it stops. To further diagnose I need a boardview to find the components for sequencing.
It seems like most of the sequencing is done with mosfets rather than and gates. The only other chip that... -
I am currently diagnosing an Asus Dual 2070 super.
The card has all the volt rails and all resistances seem to be ok.
I checked for PEXReset and the and gate is outputting 1.8V.
Main problem that I found about this card is that the resistance values of the first two PCI Express lanes (A13 and A14) have lower resistances compared to all other lanes.
Since there are no components between the PCI-E slot and the GPU, would this mean that the GPU itself is dead
?
Thanks for any help. -
[HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
Hi everyone,
I'm working on an Acer Nitro 5 unit with the following specs:- Motherboard: LA-J871P Rev: 1B
- Model: Acer AN515-55-59MT
- S/N: NHQ7JAL00403906A973400
- SNID: 03902728734
Initial Issue
The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.
After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled...
Comment