Hello everyone! I have similar problems, I have an athlon 220G and I have 3 boards, all a320mk, 1 is a rev. 1.02 and the other 2 are rev. 1.04.
The plate rev. 1.02 has a macronix MX25U12873F eeprom, and it worked with the rom, 4011, while the rev. 1.04 have winbond 25q128fwsq eeprom, it doesn't work, I use CH341 with 1.8v, and AsProgramer, the rev. 1.04 turns on the led, and turns on the fan but gives no signal.
Does the eeprom have anything to do with it?
Sorry, im using translate, im speak spanish...
[Request] Asus A320M-k updated BIOS Dump
Collapse
X
-
Attached FilesLeave a comment:
-
Leave a comment:
-
alguien tiene la versión PRIME A320M-K BIOS 5220 directo de la placa?
Does anyone have the PRIME A320M-K BIOS 5220 version directly from the motherboard?
in English please..Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Hello there! I was wondering if you could help me figure out how to transfer my serial number and MAC address to a BIN file. Any assistance would be greatly appreciated. Thank you!Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
You should write your device model number, upload your BIOS Backup, take an image for the chip to see what is written on it and add the link of the official BIOS.Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
I downloaded a bios file from asus and its 16mb and I need only 8mb..
help pleaseLeave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Hi Guys. Here I copy the Original Bios file of a working Prime A320M-K.Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Well here´s an update, I managed to borrow an AMD Ryzen 3 2200G and with the updated 6402 that I downloaded, extracted and flashed chip, but that the Ryzen 5 4600G did not boot, I installed the the R3 and booted fine, checked the bios it said Ver. 6402, power down, I then swapped the R3 for the R5 and BOOOM! it booted...... WTF!Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Well here´s an update, I managed to borrow an AMD Ryzen 3 2200G and with the updated 6402 that I downloaded, extracted and flashed chip, but that the Ryzen 5 4600G did not boot, I installed the the R3 and booted fine, checked the bios it said Ver. 6402, power down, I then swapped the R3 for the R5 and BOOOM! it booted...... WTF!Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Has this problem been solved, I'm also facing the same thing, I want to upgrade the cpu to r5 4650g, the bios position is 5606 and can't update to version 5862 because I'm using a cpu a6 9500 which is not supported in bios 5862Leave a comment:
-
-
Re: [Request] Asus A320M-k updated BIOS Dump
Is this actual 5862 BIOS dump or extracted from download ...?Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Try again with 5862 version.Attached FilesLast edited by hoaca388; 07-11-2022, 02:09 PM.Leave a comment:
-
Re: need bios for Asus prime a320m-k
Same here, still haven´t been able to get a dump from an updated "working" board...Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
I have no problem detecting chip or errors during write.. I did a comparison by programming chip, then read content with ASPprogrammer, NeoProgrammer and CH431 software, saved file and compared to original file with HexFlex and HXD and content is the same....Leave a comment:
-
need bios for Asus prime a320m-k
Hello i need the dump bios for this Motherboard becouse i have r5 4500 and i can't update the mb to make the cpu work in this mb
i need ver 5862 or higher than 5862
E307069 GE-1Last edited by Reda123456; 07-06-2022, 11:43 PM.Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Ch431A is a programmer with poor reliability. Flash the bios file for your chip, then read the chip again and compare with the original file to see if they are the same.Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
I am also struggling with this board, using a CH341a the newer type with the built in voltage selector switch.
My board has a Winbond 25Q128FWSQ which is 1.8v, but the chip does not auto detect, I can manually select the closest chip which is the W25Q128FW [1.8] however if I try to erase the chip I get a "Probable erasure failure, check protection bits in status registers"
I am using the NeoProgrammer 2.2.0.8 with a clip over type device, I don't have to tools or skills to desolder due to very severe shaking, so can't avoid this option sadly.
I also get "verification error on address: "random hex address" " when I try to do any kind of "off-protect->erase->blank check->write->verify sequence.
Any help would be appreciated, maybe we can solve the problem for both of us. TIA for any helpLeave a comment:
Related Topics
Collapse
-
Hello to all of you! I need help with a BIOS file.
The BIOS chip is fried on my Asus F542UN laptop, and I bought a new chip that needs programming. I have a CH341a programmer but I need a .bin BIOS file. On Asus support page the firmware has another extension, .310 and from reading on this forum I understand that that file is not complete BIOS.
So, in short I need the "complete" BIOS .bin file to flash on the new chip. Another issue is that on back of the case the label says F542UN but on the sticker on the motherboard it's X542UN.-
Channel: BIOS Requests ONLY!
-
-
by DynaxSCHi,
I have a serious problem to program the Z590 chipset SRAM with a Management Engine after replacing the chipset.
The new chipset is factory new and is not containing any Management Engine. Any attempts to program it into the chipset under Windows ends with a failure (eg. Error 20: Management Engine Device not present, or something similar).
Due to the lack of the ME several ports on the board, including all M.2 ports aren't working, booting OS works only on USB. So it's now other way, as to program the chipset with a ME.
Usually on ASUS boards it worked...-
Channel: BIOS & Schematic Requests!
-
-
by grimacelordHello,
I have spent the last hour on this and I guess this is just over my head, so here I am.
I have an ASUS TUF GAMING Z790-PLUS WIFI motherboard here that needs to have the BIOS updated in order to accept the latest CPUs.
The BIOS chips seem to come as a set of two: GD25B64ESIG and GD25B128ESIG. My guess is one of them is a fail-safe for the main BIOS? I really don't know. Or one of them is ME and other is BIOS? I don't know.
Anyway, I took dumps of both chips and then downloaded the latest update for this motherboard from ASUS's website...-
Channel: BIOS & Schematic Requests!
-
-
by jbonavitaHi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...-
Channel: BIOS Requests ONLY!
-
-
by ShamithaCan any one find me the bin file of Asus X540UA. Core i3 8 gen and on board vga. Bios are locked and need to flash new bios. Please help me !
-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: