abel2b
Member
Last Activity: Today, 03:24 PM
Joined: 03-08-2009
Location:
-
Thank you! good enough for a HP 14-DQ1004LA DAOPADMB8F0... -
I got it ... I hope it will bootup after I restore shorted IC´s and/if CPU is not bad .......
Also just in case someone else is reading this, windows key is at offset A9E000, MPMLock at A9F000 and finished at A9FFF0 (Block
A9E000 - A9FFF0)
Thank you! Thank you!...Leave a comment:
-
Thank you! very helpful. I did run into a problem.. on point 1, I searched for my Serial Number and found 3 mentions (blocks, offsets, whatever ?) of it so which to choose ?
Point 2 windows key no problem I found it..
Point 3, yes I am aware I uploaded a fresh extracted copy from HP website as reference only... I did not want to upload oringinal backup so I can do it on my own...
Point 5 I am aware I´m working on that as we speak, I´m currently waiting on replacements IC controller...
So how do I choose which block corresponds to DMI data ... ?
Also...Leave a comment:
-
Yes I have been reading there, but can not get head or tails, one problem I have is the firmware repo has up to 13.0.60.xxx.CON_LP and I need 13.0.65 am not sure if downgrade is permited......Leave a comment:
-
Hello, Can anybody help with how to recover DMI and Windows Key from HP 14-DQ1004LA Bios
Can someone teach me how to edit New *.bin with DMI and Windows Keys from broken bios.
where should I look (OFFSET) in old dump?
What must be copied to make new functional bios?
MY machine is:
HP 14-DQ1004LA
S.N: 5CD0080M17
Background: Tea was spilled on my notebook accidently I imediatly, turned off, unplugged and opened to disconnect battery, I cleaned everything thoroughly, I checked all power supply coils for shorts and all good, except Vcore coil ohms at 0.1 ohms, but I searched around and it seems it is ok. I powered up the board , and all voltages... -
Thank You! most helpful......Leave a comment:
-
Asus ROG Strix B550-E Gaming boardview needed
Hi, I´m looking for B550-E schematic or board view, I need SIO and PCH must have standby voltages to boot or SIO power up sequence?
Motherboard died after removing GPU for cleaning, after plugging all back, board is dead no lights, LED or Q-code nada!
PSU is ok
CPU tested on another board ok
GPU tested on another board ok
RAM also tested on another board ok.
on PHD6000 header I have SKTOCC# (3V) ok, 3VSB_ATX ok, but I do not have 3VSB_SIO on pin 45 of SIO (NCT6798D)
I have B550-Plus, B550M-Plus. B550-F boardviews and all have... -
Thank you! Thank you!...Leave a comment:
-
Re: 6-71-W5400 D02 BIOS needed
Also download from this repo, after I unpack file it has Bios folder and EC folder with .bin for each, yet my board does not have U19 chip corresponding to EC a per schematic and it not missing cause laptop was working as is ... see image
...
Leave a comment:
-
Re: 6-71-W5400 D02 BIOS needed
...Leave a comment:
-
Re: 6-71-W5400 D02 BIOS needed
Well, first place I found yesterday and downloaded latest W550EU yet ME version and SKU does not match original is SKU 1.5MB and repo is 5MB is that OK ??...Leave a comment:
-
6-71-W5400 D02 BIOS needed
Hi, can someone help with proper BIOS for Bangho G01-I318, I think it´s a Clevo W550EU based on tag under RAM ..
The problem is laptop stuck on bios boot logo "Bangho" press F2 - F7 screen and wont respond to any key press or boot from HDD or USB drive... nothing
I aldo followed Winraid guide to clean ME region and reflashed image to chip with same results..
I´m providing original Bios Dump if someone cares to check it´s in working order...
Thank you!...Leave a comment:
-
Re: [HELP] Toshiba C45-C4320K LA-C442P Dead, No Video, Power LED ON, NO Shorts..
Hi, sorry for late update, had bad personal problems, but here we are again....
Board is drawing only 170mA when power button is pressed...
Can you tell me what voltages and or currents I should be seeing on the inductors...?...Leave a comment:
-
Re: [HELP] Toshiba C45-C4320K LA-C442P Dead, No Video, Power LED ON, NO Shorts..
Yes it stays on, no problem even charges battery, but it doesn't post or even turn on the screen or backlight, I tried plugging external monitor and no image either...
I believe inductor E (view image attach) is too low, I believe it is CPU_Core should be about 1V no?...Last edited by abel2b; 02-27-2023, 02:23 PM.Leave a comment:
-
troubleshooting a TOSHIBA SATELLITE C45-C4230k
What are KB9022Q (KB9012Q) relevant voltages and signals required for proper boot....Last edited by abel2b; 02-24-2023, 04:40 PM.Leave a comment:
-
Re: HP Probook 430 G3 wont turn on
Check Flash chip model and voltage, I get that error when trying to program 1.8V chip, in that case, you need 1.8V adapter for ch341 ...Leave a comment:
-
[HELP] Toshiba C45-C4320K LA-C442P Dead, No Video, Power LED ON, NO Shorts..
Toshiba C45-C4320K LA-C442P Motherboard
Hello, can someone please help troubleshoot and verify voltages on this Toshiba board, I can´t seem to find schematic for this model.
It won´t boot, no video, just power LED lights up when button is pressed.
Inductors resistance to ground is:
A 3.3MOHM
B 32K OHM
C 43K OHM
E 48 OHM
F 92 OHM
G 166 OHM
I checked all relevant KBC IO (KB9022Q) signals (VCC, AVCC, EC_RST, AC_ON, LID_SW, ON/OFF_BTN, ETC...) and all is good; just in case I reprogrammed KBC and BIOS with...Last edited by abel2b; 02-24-2023, 05:15 PM. -
Re: [Request] Asus A320M-k updated BIOS Dump
Well here´s an update, I managed to borrow an AMD Ryzen 3 2200G and with the updated 6402 that I downloaded, extracted and flashed chip, but that the Ryzen 5 4600G did not boot, I installed the the R3 and booted fine, checked the bios it said Ver. 6402, power down, I then swapped the R3 for the R5 and BOOOM! it booted...... WTF!Leave a comment:
-
Re: [Request] Asus A320M-k updated BIOS Dump
Is this actual 5862 BIOS dump or extracted from download ...?Leave a comment:
-
Re: need bios for Asus prime a320m-k
Same here, still haven´t been able to get a dump from an updated "working" board......Leave a comment:
No activity results to display
Leave a comment: