Can I have a BIOS.BIN please for
Biostar A780L3L ver 6.1
its a last effort to revive it if anyone can help
Biostar A780L3L ver 6.1
its a last effort to revive it if anyone can help
-
Hello fellows,
I am putting a feeler out for a schematic (or ideally boardview) for the Biostar B660-T Silver motherboard.
I had let my guard down and decided to trust the Biostar supplied Windows based BIOS flash tool, only to find that the system would not POST upon restart.
no problem I thought - I would just flash using my trusty CH341 and be on my merry way.
Upon inspecting the board and locating its Winbond NOR, I found it in a rather precarious spot nestled between the RAM slots and PCIe slot and right next to a rather meltable-looking...12-13-2024, 09:37 PM -
Biostar GeForce 6100 AM2 (CRU51-M2) Schematic
Biostar GeForce 6100 AM2 Ver. 1.x is a motherboard based on the Nvidia nForce 410 (GeForce 6100) chipset....10-31-2024, 02:29 PM -
Hallo guys
can anyone have schematics or boardview for Biostar TA870+ ?
I want to diagnose the problem, all voltage seems to be present, but still give me D0 code when I put diagnostic card in there
thanks10-24-2025, 09:11 PM -
Hi. I need some help troubleshooting the issue (which is a bit odd to my limited experience) with the A2338 Macbook.
Initial symptoms:
One day the laptop refused to wake up (as it seemed at first), spinning the fan on full blast, with no picture on the screen.
Force rebooting didn't help. To check if it boots at all I connected the external display and surprisingly it booted to the system, and I was able to log in to the system.
However, I noticed that it was in some weird state:- The fan was still blasting at full speed. It's blasting even when the system
-
Hello,
I’m looking for the boardview file for the Biostar A320MH Ver. 6.7 motherboard.
Preferred format: OpenBoardView-compatible (.fz, .cad, or .brd).
I already saw that some revisions (like Ver. 6.0) are around, but I specifically need Ver. 6.7 if possible.
Thanks in advance to anyone who can share or guide me to it!08-31-2025, 06:26 AM
Comment