Help me pls. Dell optiplex 3080 clean bios
Collapse
X
-
Please Help remove Absolute
Dell Optiplex 3080 micro
ST: 3WKVSC3
I tried with HxD but it couldnt locate AA 55 3F 00 03
Leave a comment:
-
Leave a comment:
-
-
-
your bios is obviously corrupted read again and use this tool
https://www.badcaps.net/forum/troubl...s-out-for-freeLeave a comment:
-
Post the service tag !!! - https://www.badcaps.net/forum/troubl...before-posting -
your bios is obviously corrupted read again and use this tool
https://www.badcaps.net/forum/troubl...s-out-for-freeLast edited by rex98; 11-25-2024, 01:45 AM.Leave a comment:
-
Help me clean bios password dell 3080Attached FilesLeave a comment:
-
Attached FilesLeave a comment:
-
Hello, please help me to remove bios password on dell 3080
service tag : FH340G3
original bios attachedAttached FilesLeave a comment:
-
Post the service tag - https://www.badcaps.net/forum/troubl...before-postingLeave a comment:
-
-
Hello, please help me to remove bios password on dell 3080
original bios attachedAttached FilesLeave a comment:
-
Hello, pls help to unlock Optiplex 3080 Micro SеrvісеТаg: 3891TC3Attached FilesLeave a comment:
-
post the S/N, post the original content of the bios chip, the motherboard model, etc.
Leave a comment:
-
Hi, I need to remove admin password from Dell 3080 micro 1P7NM93. I received a counter-password code from Dell but didn't work. Can you help me?Leave a comment:
-
Leave a comment:
-
Hello, please can somebody help me with my locked bios for my Dell Optiplex 3080 Service Tag DFGDJB3
Attached FilesLeave a comment:
Related Topics
Collapse
-
by gizahaDell latitude 5580, motherboard cdp 80 la-e151p
3 amber 3 white blinks. Dell website sais it's problem "bios recovery" and suggested solution "recovery image not found"
(from here https://www.dell.com/support/manuals...e7a&lang=en-us)
I try plugging charger while pressing ctrl+esc, machine turns on, nothing and after 20 seconds it gives 3 amber 3 white blinks again.
Since ssd is replaced and had clean install windows, i've... -
by bmxlovahHi,
My Dell Precision T7910 died after enabling onboard SAS controller and applying RAID settings. There were no hardware changes between working and not working state, only setup (via bios -> controller settings). After applying settings and reboot PC turns on, flash leds (normally) but there's no further action, it just stays on with no graphics and no keyboard led's on. There's no Dell logo, nothing. I've tried resetting bios by jumper, replacing cpu's, replacing ram, removed/replaced cmos battery, disconnecting all drives etc. I've also dumped .bins from mobo chips SLI1 (16...-
Channel: BIOS & Schematic Requests!
-
-
by trix11I have a Dell Precision T1650 MT workstation (of the following spec.) that was bricked yesterday when attempting to update the BIOS from A27 to A28 per:
- https://www.dell.com/support/home/en...-t1650/drivers > Dell Precision T1650 System BIOS
- Dell Precision T1650 mid tower Workstation
- Xeon E3-1225 V2
- 32Gb PC3-12800E RAM
- 4Tb SATA HDD
- motherboard: Dell part: 0C3YXR CN-0C3YXR-72200-39C-01GR-A02
I see now that others have experienced like issues e.g.:
- https://www.dell.com/community/Prec...-
Channel: BIOS & Schematic Requests!
-
-
by lalle-Hello!
I have a problem with a Dell G5 SE 5505 laptop that I hope someone can give me a few pointers on.
[OK, it's not really a laptop, I'm running the motherboard on my desktop with only cooling, RAM and an M2 drive attached.]
I had some performance issues, so I decided to update my BIOS from 1.7.0 to the latest version, 1.20.0.
The computer restarted and the update dit not want to continue without a battery connected, even though I used dell's method of bypassing this requirement.
I tried updating to a custom BIOS from Reddit user Satori_Nori https://www... -
- Loading...
- No more items.
Leave a comment: