LENOVO M90-IQ57N rev 1.0 Schematic
Dear Brothers,
Please help to find the schematic of LENOVO M90 pc.
Board ID - IQ57N rev 1.0.
Thank you.
-
Lenovo 3000 Series Schematic
Lenovo 3000 was a line of low-priced notebook and desktop computers designed by Lenovo Group targeting small businesses and individuals. It was replaced with the IdeaCentre and IdeaPad brands.
3000 C100 laptop with Braille keyboard
Lenovo 3000 C
C100, C200 - 15-inch XGA screen
Lenovo 3000 N
N100, N200 - 14.1-inch- and 15.4-inch- WXGA models
N500 - 15.4 inch screen.
Lenovo 3000 V
V100, V200 - 12.1-inch WXGA models
Lenovo 3000 G
G400, G410, G430, G450, G455, G510, G530, G550, and G560...10-04-2024, 06:05 AM -
For Badcaps Readers, Please note that I am hopefully going to present this same message to Lenovo to see if they have any insight to the matter as well and figured to share the entirety here for clarification. The System is out of warranty as it is but does have the option to have it extended.
Model Information: T14 Gen 2 (Type 20XK, 20XL) Laptop (ThinkPad) - Type 20XK - Model 20XK0069US
Board: T14 Gen 2 (Type 20XK, 20XL) - Type 20XK.
System Hardware:
Processor: AMD Ryzen 7 PRO 5850U
Memory: 1x 16GB DDR4 3200 (Soldered on Board); 1x Crucial 32GB DDR4...09-08-2025, 10:46 PM -
Hello everyone,
OK, so here is my issue.
This Lenovo B470 motherboard I am troubleshooting died and I identified it is the discrete Nvidia graphics chip that has lost it's ways!
So I removed it and now I am trying to change this motherboard to use UMA graphics, but I am having an issue interpreting the attached diagram. I have a 10K resistor in at the R2013 position and another one at the R2012. R2010 and R2011 are empty.
The motherboard starts, the fan spins but no display. It turns off by itself. I restart it and it does start but stays on...08-12-2024, 02:01 PM -
Hi gays can anyone please help me with this model Lenovo yoga pro 9 16irp8 schematic and boardview.10-24-2025, 05:55 AM -
Request Schematic & Boardview Lenovo Idepad Miix520-12IKB Tablet 1702B_05_01 Rev: 1.0...10-13-2025, 06:50 PM