Graphics card Schematics and Boardviews
Collapse
This is a sticky topic.
X
X
-
Re: Graphics card Schematics and Boardviews
Thank you, ive got a few differnt board views and schematics here my problem is board view is showing something that looks like maybe a ferite bead then on the pdf ones i have its showing resistors a 10k and a 0ohm this is a little confusing here is a picture of what they actually look like on the gigabye 1080 board i have one is located at r990 and the other is r991
Hello! Yes, I agree with your assessment on that.
Please feel free to send me a private message and I will try to help you locate and/or identity the parts you need.
EDIT: I see your post on the last page and will look into that ASAP. I even have a 1070 coming tomorrow (Friday) so that may also help. Still, any info you may think will help can still be added in a PM.
Are your components part of the DVI port circuit?Last edited by WayOfTheRoad; 11-11-2021, 07:13 PM.Comment
-
Re: Graphics card Schematics and Boardviews
Hello! Yes, I agree with your assessment on that.
Please feel free to send me a private message and I will try to help you locate and/or identity the parts you need.
EDIT: I see your post on the last page and will look into that ASAP. I even have a 1070 coming tomorrow (Friday) so that may also help. Still, any info you may think will help can still be added in a PM.
Are your components part of the DVI port circuit?Comment
-
Comment
-
Re: Graphics card Schematics and Boardviews
Unfortunately there doesn't seem to be any Zotac boardviews for anything in the 10-series and above. I thought I've seen some 20-series but I can't even find those anymore.Comment
-
Re: Graphics card Schematics and Boardviews
Hello to all!!! I''ve read all the thread, and didn't find what I need. I need gigabyte gtx 970 wf3oc-4g rev.1.1 boardview. I've searched all the internet and didn't find. There are boardview files for Gigabyte GV-N970TTOC-4GD Rev1.0, but the PCB are not the same! I will be very grateful if someone posts boardview file forgigabyte gtx 970 wf3oc-4g rev.1.1. I have two missing smd elements on C256 and R378 and I don't know their values!Comment
-
-
Re: Graphics card Schematics and Boardviews
edit: pcb looks 95% identical to Nvidia FE, but without pads for missing parts and thus slightly different layout.
so FE-Boardview would also help.
Hello,
I'm currently trying to repair a Palit Geforce 1080ti Blower.
Does anyone have a boardview / schematic?
Kind regardsLast edited by Fump; 11-16-2021, 05:22 AM.Comment
-
Re: Graphics card Schematics and Boardviews
Does anyone happen to have an Asus ROG Strix RX 580 O8G Gaming schematic / boardview?Comment
-
Re: Graphics card Schematics and Boardviews
Gigabyte GV-N1070WF2OC-8GD Rev 1.0 BoardView
GeForce GTX 1070 WINDFORCE OC 8GComment
-
Re: Graphics card Schematics and Boardviews
Gigabyte GV N970G1 GAMING 4GD REV1.1Attached FilesFollow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videosComment
-
Re: Graphics card Schematics and Boardviews
Not a schematic or board view but I came across this document today which could be useful to some of you
Geforce 10x / 11x design overviewAttached FilesFollow me on YouTube
------------------
Learn Electronics Repair
https://www.youtube.com/channel/UCFX...R8UZ2vg/videosComment
-
Re: Graphics card Schematics and Boardviews
I've been running an SLI setup for about 6 years with two GIGABYTE GeForce GTX 980Ti 6GB G1 Gaming OC Edition. One shorted out a year ago. I bought a used one on Ebay. Now the other original has shorted out. After taking the heatsinks off I can't find any visible problems. I'm looking for a schematic. Anyone have one to share???
Any other info/tips on this card would also be helpful... Thanks!Comment
-
Re: Graphics card Schematics and Boardviews
Hi All.
I'm looking for the schematic of GPU MSI GTX 670 Twin Frozr.
I need replace the PWM from Memory Sector...if someone have the Name or Serial of the component, I really appreciate the help.
Thanks in advance !Comment
-
Re: Graphics card Schematics and Boardviews
Does anyone have boardview for Palit 1070? I have a Cap missing at the back of the card near the up9511p buck controller.Comment
Related Topics
Collapse
-
by harpI have a one question about startup procedure of graphics card.
On graphic card Gainward GF9500GT 512M (in attach) I do basic passive measurements, diodes, mosfets, fuses, some resistor, rails... on gpu is about 3 - 4 ohm... but else nothing is shorted.
I plug card into MB and boot up. Splash screen and boot text was appear only on integrated vga on MB, and after about 10 seconds the MB shutdown itself. There are no switching to external graphics card (that I inserted). I try another time and it is all the same repeating, after 10 seconds MB go off.
I do not any... -
by caspianDear Forum Members,
I have an ATX mainboard: ECS MCP61M-M3 with CPU: Sempron 140 and Chipset: MCP61.
If I use only the Onboard Graphics, the Chipset's temperature is about 52'C.
If I use a PCIE x16 Graphics Card, the Chipset's temperature is about 70'C and tends to go higher. But the Graphics Card's temperature is normal.
In both the two cases, the PC works fine.
I have tested two different Graphics cards and it gets hotter with both of them.
Any idea why it gets hotter with Graphics Card?
Thanks03-03-2022, 04:56 AM -
by black_71
- Machine Model Number: Lenovo G510 (20238)
- Specifications:
- Motherboard Model Number: Factory (LA-9641P HannStar), Actual (LA-9641P Palwonn)
- Motherboard BIOS Version: 79CN48WW(V3.07)
- CPU: Factory (Intel i7-4702MQ), Actual (Intel i5-4310M)
- GPU: AMD Radeon R7 M265
- RAM: 2 x 4GB DDR3 1600Mhz (8GB)
- Storage Device: Kingston A400 SSD + TOSHIBA MQ01ABD (in a 12.7mm Tray)
- History, Symptoms and State of the Machine:
- History: Some of the factory motherboard's components were fried, possibly due to overheating, but I'm not sure. The only difference between
- Machine Model Number: Lenovo G510 (20238)
-
by RhaverzGood afternoon friends, I have the same problem, the equipment turns on, when I connect it to the equipment and without connecting it to the HDMI or Display port with the integrated graphics of my equipment, the graphics can be displayed in the device manager with an error 43 but even if I try to update it "manually" it manages to remove the notice but it still doesn't work.
If I connect the graphic with the HDMI or Display port, the equipment turns on but it makes a long and 3 short beeps and does not give video
I thought that the BFDJ USB-C or MP8858GQ... -
by BorgesI have been learning about microcomponents and GPUs for a while now to make an attempt to fix a few GPU I have bought from eBay.
For some older model I have started making some repairs as it has been easier for me to find the schematics and BoardViews' for modle sbelow gtx 1080/rx 480. However I have a few GPUs I have bought that I am having a hard time diagnosing or finding any schmatics/boardviews. These are the following GPUs that are giving me a headache:
- GIGABYTE Radeon RX VEGA 56 GAMING OC 8G
- GIGABYTE GeForce RTX™ 2080 GAMING...-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Comment