Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
post the backup of the bios..the original bios ..
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
HI, could anyone could provide an BIOS image of HP600 G2, which removes the secondary fan warning?
I recently replaced the CPU from G4400 to I5-6600, the system warns me every time after power on.Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Apologies its a RT809F Serial ISP Programmer that a mate is using to do this. I assumed it was the EZP 2019 as it looked similar. Could it be this programmer cannot detect this chip?Leave a comment:
-
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Can anyone assist which bios chip to use as mine is not readable at all and not able to detect in programmer. will Winbond work or does it need to be MXIC MX25L12873F as one person suggesting? the winbond i have access to is 64 and not 128 so not sure what to get.....????Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Thanks mate! Now is everything working good, without any password! Just like that, in plain text?
Some problems with flashing using clip - after erasing, the programmer stopped seeing BIOS IC and I had to go to a friend, de-solder IC and flash it with a Mini-pro programmer. A friend suggested doing this at the very beginning 
Leave a comment:
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi! Finally I got the CH341 (I had to follow him to the other side of the citythe posted bios is not ok..I don't know if due to old age or laziness
... it may be a corrupt bios, or it may have read you with errors..try to make more copies, and if they fit into the HxD it means that they are read ok, and so is the bios..posts again..if you don't feel like doing what I proposed, and the laziness is very big, try a bios from the posts in this thread that worked for others. .) programmer and read the BIOS dump. Plz check. Thanx.
Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
the posted bios is not ok..I don't know if due to old age or laziness ... it may be a corrupt bios, or it may have read you with errors..try to make more copies, and if they fit into the HxD it means that they are read ok, and so is the bios..posts again..if you don't feel like doing what I proposed, and the laziness is very big, try a bios from the posts in this thread that worked for others. .
Leave a comment:
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
you need an SPI programmer (ch 341A, TL866), disassemble the laptop, look for the bios chip, with the programmer read the bios chip, check the content with the HxD program to be ok, make a copy and post it here and someone will delete your password, after which, rewrite the chip with the new bios and you're done.
here is a video ... you can see more ...
https://www.youtube.com/watch?v=DWWigscuQDYLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi, peste! I need your help. My wife has lost bios password from her HP ProDesk 600 G2 Mini. Which tool I should use to create bios backup/return it back, HP BIOS Update and recovery? Which version? Or I need to use special program cable? Thanks in advance!
upd: HP BIOS Update and recovery wants password for doing backup (((Last edited by Mantikor; 12-06-2020, 05:11 AM.Leave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi
how did you do it?
it's working, all fixed now, i had to do couple of tweaks after flashing this image but all is perfect now.
Thanks a lot, you are very good.Last edited by SMDFlea; 12-01-2020, 10:52 AM.Leave a comment:
-
-
-
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
Hi.
i have this computer HP ProDesk 600 G2 mini.
bios update failed.
now computer does only 2 beeps with red color.
can someone help me with a bin file that i can write on the chip?
does someone know if i can ever write that chip and to work properly, or what i should do?
thank youLeave a comment:
-
Re: Request bios for HP PRODESK 600 G2 DESKTOP MINI
try the bios from post # 8.10Leave a comment:
-
My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.- I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
- I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
- I could only locate two chips that look like bios chips. Could someone verify this
-
can anybody please help me open my bios so i can adjust my settings and play the game i used to play before, it always appear to have a password i don't even know, i tried entering my desktop password but it won't open and i didn't remember that i put a password onto it
HP ProDesk 600 G5 Desktop Mini
Manufacturer: HP
Product: 8598
Serial Number: PHVUT0A8JDOIDR
Version: KBC Version 08.09.20
please feel free to reply onto me if there's any other information u need to know to unlock it -
Hi there,
I need your help, dumped the BIOS with CH431a controller, but the usual tools are not working because it is a 32MB Bios file.
Serial: 8CC13458H1... -
Hi,
as noobie to this please excuse my lack of experience.
I am trying to remove a BIOS password from this machine:
HP ProDesk 400 G6 Mini
but so far I still have no success.
I bought CH341 programmer and decided to give it a try.
The programmer came with 8 pin cables and connectors or whatever everything else is called so I had to buy a new 16 pin cable because the chip which I think is the BIOS is with 16 pins..
I connected everything and downloaded AsProgrammer and NeoProgrammer then installed drivers... -
HELP CLEAN ME
HP ProDesk 405 G6 DESKTOP MINI PC
SNL 8CC152147M
daf92mb26b0
...
Leave a comment: