HP Pavilion All-in-One 24-a251d bios

[mustafa4444]

i am confused. pls tell me how to program it8987 in all in one (da0n83mb6g0) since there is no keyboard connector. rsmrst is not present. 3.3v, 5v, 1.8v, 1v are present. power led keeps on blinking next to switch. pls guide. Thanks

[peste]

i am confused. pls tell me how to program it8987 in all in one (da0n83mb6g0) since there is no keyboard connector. rsmrst is not present. 3.3v, 5v, 1.8v, 1v are present. power led keeps on blinking next to switch. pls guide. Thanks

depending on the programmer you have, there are some adapters for these I/O chips..it gives you the possibility to program it externally before it is soldered..not all I/O chips are programmed through the keyboard socket.. you can find more information on the internet.. try this first.. stick the I/O chip and turn it on.. it is possible that the chip will write itself at the first start.. you also have the possibility to stick wires between the programmer and the pins of the chip I /O, but you need to know the configuration for the respective motherboard..