X99-Gaming 5-1.0 emadarion
-
ut300r2u modem,link light stays on forever no matter if if dsl phone wire connected or not.i dint mess with any firmware ,it started to be like this for past few months until it stopped all together to work anymore,so learned that flashing might help, need dump file for this modem, i have only ch34a1 programmer.so i erased and flashed with few bin or ras files i got from internet but nothing worked.so further reading let me know that have to flash a whole full dump .if any idea, pls share, thank you. -
Please could someone help or advise. I have an Apple Cinema Display A1316 and it all of a sudden is taking a really long time to come on. I assume it's probably a capacitor related issue on the power board, I'm just wondering if anyone has experienced something similar and if these monitors are easy and or worth trying to get repaired. Thanks in advance for the help.
-
Sigh. Now I'm getting a whole bunch of S775 boards. Luckily I got rid of one...
Wondering what people thinks about chipsets for S775 boards and their long term longevity. I had a few boards that failed.
MSI Neo3 (865) - gone but it was working (ATX)
Asus ??? (915) - crashes randomly (ATX)
Foxconn G9657MA (G965, onboard graphics) - dead (µATX)
Gigabyte EP43-UD3L (P43) - bad USB ports but otherwise still works (ATX)
Gigabyte G41M(???) (G41) - still working (µATX, only 2 DDR2's)
Intel DQ45CB (Q45, onboard graphics) - still working (µATX)... -
Hello, everyone!
I have here a Schenker VIA 15 PRO, with this numbers on the board: PF 4NU1F V1.0 and P/N: MBPPF4NU18-F310 .
I took out the memory and the battery and the SSD.
So, in stand-by, only the board, takes 36mA. No power-button pressed at all, I can measure 1.8V, 3.3V, 5V. All coils present voltages except the two power rails for the CPU. The CPU is a AMD Ryzen 5 4600H.
After pressing the power-button, the current raises to 500mA and the two power rails for the CPU show up with 0.8V.
After several seconds, the fans switch-off and the board keeps powered...03-08-2025, 04:45 AM -
Comment