Hello to all,
I need help regarding correct EC dump with the following problem explained below:
Original EC chip KB9022Q -D was shorted, so I replace it with another one, normally empty. I pay for EC dump file from another forum, but after programming, CPU fan is not working anymore and battery is no longer detected.
Previously everything was working.
So currently, I have wrong configuration table for the mentioned laptop above, battery is not detected beside that I have correct voltages for SDA/SCL, and 2 fan PWM is not active. (5v are present on CPU fan)
Configuration:
Lenovo IdeaPad Gaming 3 15ACH6
Board: LA-L171P REV:1A
EC: KB9022Q-D
dGPU model with NVIDIA GTX1650
2-Fan version (CPU + GPU separate control)
Backlit keyboard
Keyboard routing: JKB1
Battery SMBUS type: L2M3PC2
Charger/power management chip: BQ24780S
Kindly I need to extract EC dump file from main bios file.
Original bios bin file attached.
Thanks in advance!
I need help regarding correct EC dump with the following problem explained below:
Original EC chip KB9022Q -D was shorted, so I replace it with another one, normally empty. I pay for EC dump file from another forum, but after programming, CPU fan is not working anymore and battery is no longer detected.
Previously everything was working.
So currently, I have wrong configuration table for the mentioned laptop above, battery is not detected beside that I have correct voltages for SDA/SCL, and 2 fan PWM is not active. (5v are present on CPU fan)
Configuration:
Lenovo IdeaPad Gaming 3 15ACH6
Board: LA-L171P REV:1A
EC: KB9022Q-D
dGPU model with NVIDIA GTX1650
2-Fan version (CPU + GPU separate control)
Backlit keyboard
Keyboard routing: JKB1
Battery SMBUS type: L2M3PC2
Charger/power management chip: BQ24780S
Kindly I need to extract EC dump file from main bios file.
Original bios bin file attached.
Thanks in advance!
Comment