fujitsu primergy tx100 s3 no display
-
-
Type the PC serial number, full name and model, motherboard model, etc.
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting
-
Hello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V.... -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible โ the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
Hello everyone,
Iโm currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, Iโm at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Hereโs a full breakdown:
๐งฉ Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I need a BIOS dump file for my Fujitsu LIFEBOOK AH47/J laptop.
Motherboard model: DAFH6BMB6A0
The system BIOS got corrupted and now the laptop powers on but does not boot.
I already tried the official Fujitsu support site, but the downloadable BIOS is only in .exe format and does not contain the raw .bin file needed for programming the BIOS chip directly with a programmer (CH341A).
If anyone has a working BIOS dump (.bin) for this model, please share it.
Thanks in advance!... -
I was clean install Windows 10 Pro without installing driver, because i believe windows will download itself.
But 2 days later it hard bricked, just battery LED charge indicator when plugged in, no boot or even post. Unplugging the battery will result zero response, LED flicker 0.1s and then everything turned off, no response to any button. Main BIOS powered 3.3V but EC is 0V.
So i though it just BIOS corrupted, and confirmed EC BIOS has been corrupted (First header is 55 AA 01 00 FF FF FF and the rest is always FF FF until offset 10000 with 00 00 blank and 11000 where...10-23-2025, 02:13 AM
Comment