Tpu doesnt turn on vcore EN. Its flash is 256kb - 25q20ct, not the ordinary 64kb. Internet suggests to extract body from GUID 38715E0A-.... But the body is 64kb.... Need the tpu firmware and the corresponding mainbios version Thanks
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.
-
Hello,
I am currently trying to repair my own mainboard ASUS ROG Crosshair VIII Hero with a defective Power regulator chip. I have already soldered off the Chip (ASP1405 / IR35201) on the backside of the mainboard but during that process i knocked off some of the resistors around it and now my problem is I don't know what resistor goes where. Does anyone has the Schematics of that board or at least of the area around the chip (I have found images of it https://www.techpowerup.com/review/a...pwmcontrol.jpg) but there are no values written on the... -
I am currently working on my Crosshair VIII Hero mainboard on which a GPU short occured after which the mainboard would not turn on again. I suspected the VRM Controller (IR35201) and soldered it off. After that the board turned on again, obviously without providing voltage to CPU etc. I soldered a new IR35201 on it but it seems like the board still don't want to boot correctly. LEDs etc. turn on normally and after I press start button the power supply turns on fully and stays on, so I guess no shorts. Also nothing gets really hot. The error code shows code 00 and I measured VCPU and it was 0...
-
Hi Guys!
Greetings!
Does anyone have the Schematics for a Asus ROG Crosshair VIII Hero Wi-Fi? I need the PDF with the specs also.
Thank you for your help!12-03-2023, 12:04 AM -
Hi all,
I'd appreciate if someone could provide the original VRM configuration file for a CH6 motherboard.
I've got an USB005 and it looks like my VRM is working fine, but as long as the board shows qcode 8, I'd like to rule out the VRM section as the root cause of the issue.
Many thanks
Pablo
PS.- I'm attaching the configuration file extrated from this board, but I cannot trust it's the correct one; the chip is not presenting the usual dot that marks it as "programmed".... -
Hi
I have an ROG MAXIMUS XII HERO (WI-FI) board with demaged PWM controller ASP1405I, and this is unfortunalely a programmable chip.
Without programming it, it won't start to work on the board - have checked this physically with a new unprogrammed chip.
I'm looking for information about the possibility to readout and program the ASUS PWM chip ASP1405I again with the firmware (configuration file).
To do this, it is necessary to buy a quite expensive I2C type interface card (named USB005), so I'm wondering if it is worth to spend the money, as this makes...
Comment