Razer Core X eGPU RC21-013101 schematic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RitcheyAuto
    New Member
    • Jun 2021
    • 5
    • United States
    #1

    Razer Core X eGPU RC21-013101 schematic

    I think this is going to be a long shot, but i need to do some rapairs to the main board of a Razer Core X eGPU and will need to find a board diagram. The eGPU is model RC21-013101. The damage is limited to the pads and traces where the PCI-e socket mounts to the board.

    The main board also has some markings. Not sure if that could help or not, but they are:

    Fiver Lite
    FCS
    V1.0
    2018.03.20
    3 Photos
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • korben_dallas
      Will I have a bricked logic board after reflow of the GPU v-core U8900 chip on my Mid-2012 15" Retina Macbook pro?
      by korben_dallas
      Hi everyone! I'm trying to fix my black screen / failed U8900 GPU v-core on my Mid-2012 Macbook Pro 15" Retinaby doing a rework/reflow of the chip (once I determine that's the real issue; but it likely is).

      I've been disabling the GPU in NVRAM for a few years... but it's just time for a better solution.

      I'm new to soldering but the only feasible way to fix this issue is to do something myself.

      MY QUESTION:
      I've been seeing some people (on this forum mostly) run into issues with the logic board needing a serial number or it being deactivated (?)...
      02-14-2024, 12:23 AM
    • Hakuu
      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
      by Hakuu
      Hi There,

      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

      More Details

      TV Model - LG OLED77G1PUA

      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
      07-12-2023, 02:37 PM
    • jb_Bak
      Sony xbr-65x900c main board issues?
      by jb_Bak
      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
      Power Board Connector that goes to Main board
      CN6401
      Pin 01 NC
      Pin 02 NC
      Pin 03 "BL_ON": 0V
      Pin 04 "N/C"
      Pin 05 "STBY 3.3V": 3.5V
      Pin 06 "GND": N/C
      Pin 07 "AC_OFF"...
      09-27-2021, 04:52 PM
    • Loading...
    • No more items.
    Working...