Help HP Elitedesk 800 G6 Mini PC LOCKED BIOS

[robert99.9]

please help me, i lost power during bios update and now it's showing 6 red flash and 3 white

[SMDFlea]

Post the PC serial number

[robert99.9]

SN: 8CC20614ZT

[Stefan Steff]

please help me, i lost power during bios update and now it's showing 6 red flash and 3 white

Try this bios file and provide feedback.
The 128Mb EC file remains as is,
I hope you know how to use the BCU tool to re-insert your DMI data...

[robert99.9]

same thing, the fan starts at full speen and no image, no red flashes this time

[danito]

same thing, the fan starts at full speen and no image, no red flashes this time

try and report

[nogai0702]

try and report

Could you please reupload the file? I'm the new owner of this elitedesk and wanted to make it work again Thanks in advance

[The-Power]

Hello, I read this file from the chip under the WLAN card, but I can't get any further. I tried using an unlocker, but it doesn't work.
Elitedesk 800 Mini g6
Please try again.
(translated by Google from German)
S/N:8CC2412L4T

[peste]

Hello, I read this file from the chip under the WLAN card, but I can't get any further. I tried using an unlocker, but it doesn't work.
Elitedesk 800 Mini g6
Please try again.
(translated by Google from German)
S/N:8CC2412L4T

the laptop has two bios chips...post both contents..

[The-Power]

How do I make the other chip have more legs?

[Stefan Steff]

How do I make the other chip have more legs?

Try first this content :

[The-Power]

elitedesk 800_clearpass_EC.zip is not wokking

[vilmar27@hotmail.com]

Hello,
Please, I have an HP Elitedesk 800 G6 Mini Desktop with a BIOS issue. I get the Main + EC bin from another same model HP 800 G6 Mini unit, I modified the BIN files to unlock MPM, and flashed them to the issues system. However, it doesn't work properly.
After flashing the unlocked Main + EC to issue unit, everything seems to function normally until I perform a "Restore Factory Defaults" in the BIOS. After that, the system fails to POST; it powers on, but the screen remains black. (I also tried clearing the EC and flashing only the Main firmware, but the same issue occurs.)

If I use the same unlocked Main + EC files on the original system from which they were extracted, everything works perfectly.

In summary, I’m looking for a generic Main + EC firmware version that can be applied to any HP 800 G6 Mini system without encountering these issues.

HP EliteDesk 800 G6 DM
Serial: BRJ145RCG4
Part: 4V0K5LS

Attached are the modified Main + EC files.

Best regards,
Vilmar

[hoaca388]

Hello,
Please, I have an HP Elitedesk 800 G6 Mini Desktop with a BIOS issue. I get the Main + EC bin from another same model HP 800 G6 Mini unit, I modified the BIN files to unlock MPM, and flashed them to the issues system. However, it doesn't work properly.
After flashing the unlocked Main + EC to issue unit, everything seems to function normally until I perform a "Restore Factory Defaults" in the BIOS. After that, the system fails to POST; it powers on, but the screen remains black. (I also tried clearing the EC and flashing only the Main firmware, but the same issue occurs.)

If I use the same unlocked Main + EC files on the original system from which they were extracted, everything works perfectly.

In summary, I’m looking for a generic Main + EC firmware version that can be applied to any HP 800 G6 Mini system without encountering these issues.

HP EliteDesk 800 G6 DM
Serial: BRJ145RCG4
Part: 4V0K5LS

Attached are the modified Main + EC files.

Best regards,
Vilmar

Clear ME before use.