Dell optiplex 3080 micro password

[rejuan99]

The BIOS that worked for me was on the reply #17 of this post:

https://www.badcaps.net/filedata/fetch?id=3228706
That's the direct link just so I don't upload a duplicate file

ST: DYZF3L3

how did you dump it?

[kuiri]

With an external programmer and a pogo clip

[rejuan99]

With an external programmer and a pogo clip

I can't, can you help.

[hoaca388]

I can't, can you help.

https://www.youtube.com/results?sear...41a+flash+bios

[rejuan99]

https://www.youtube.com/results?sear...41a+flash+bios

I can't read using this programmer and I don't know what is that I'm doing wrong.
the programmer is ch341a
Software i tried, asprogrammer,neo programmer .
the bios chip is MX25L25673GMI-08G. 16 pin.

[peste]

I can't read using this programmer and I don't know what is that I'm doing wrong.
the programmer is ch341a
Software i tried, asprogrammer,neo programmer .
the bios chip is MX25L25673GMI-08G. 16 pin.

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[kuiri]

I can't read using this programmer and I don't know what is that I'm doing wrong.
the programmer is ch341a
Software i tried, asprogrammer,neo programmer .
the bios chip is MX25L25673GMI-08G. 16 pin.

I've used AS Programmer with CH341a before and it works great, it takes a little longer than the RT809F though.
Make sure it s detechted on the Hardware tab.

[deepfreak]

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

Not necessarily.
I've used this kind of test hook clip set from aliexpress.


They sit better on the bios chip than the usual SOP8 or SOP16 test clips because each clip has a hook that firmly grips the respective pin.
They worked perfectly without unsoldering the bios chip.


best regards