Got the card from a friend of my told me it works sometimes since mine said bye bye (gigabyte cracked PCB) after i got the card i used furmark first and let it ruin for around 30 minutes. the card did fine no errors then i used ugine performance test and that's when it went to the black screen but it happens toward the end first time it was on scene 17/17 and the second time it happen right after it was completed and gave me the results, the screen goes black and as long as i power cycle the pc it works again, for some reason restart doesn't. check the coils on the card which were fine and did a visual inspection and it is in great condition, i reapplied thermal paste and aided new thermal pads. then i used mats and it seem to have no errors. i haven't used it to play a game yet but i did use fusion 360 quite a bit and had the pc on for few days straight and no issue with it. any help is greatly appreciated, and i also attached the mats results. i am pretty good at micro soldering and can do troubleshooting on electronics but i have never dealt with any GPU's
-
Hi i need help troubleshooting predator helios 300 mboard: LA-F991P
gtx1060 6gb
laptop shuts down when benchmarking UNIGINE 3d after 2 minutes
and temps are normal when monitoring while running, when laptop shuts down it makes bios reset process when turned back on (i have to take battery out otherwise it wont start) otherwise it seems to work fine, rtc battery shows 2.8v
i updated bios ,tried whitout battery ,whitout rtc battery, with another charger but it did not help with problem, anyone had similiar problem? thanks -
Hello guys.
I have a RTX 3080 zotac Trinity on my bench that hasn't vídeo. All the DC DC tension are working, fans aren't at 100%, but working normally. But....... The current load os about 20A more. GPU get hot, but not so much, the memories get hot, VRM is 1.40V, VCore 1.10V.
All this tests os only in the bench, without any signal in the PCIEX.
Só, the question, GPU probably dead? What you guys can say? -
NVIDIA GeForce RTX 3080 / RTX 3090 Schematic & Board View
The GeForce RTX 3080 is an enthusiast-class graphics card by NVIDIA, launched on September 1st, 2020. Built on the 8 nm process, and based on the GA102 graphics processor, in its GA102-200-KD-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 3080. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The GA102 graphics processor is a large chip with a die area of 628... -
This specification for the DELL OptiPlex 3080 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the OptiPlex 3080 boardview and OptiPlex 3080 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for DELL...09-12-2024, 03:44 PM
-
This specification for the DELL OptiPlex 3080 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the OptiPlex 3080 boardview and OptiPlex 3080 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for DELL...09-12-2024, 03:44 PM
Comment