Anyone with a software for removing password from a m.2 ssd ata security lock
-
Hi,
I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
The board is generally working now, all PCIe ports are working, Windows installs normally.
However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set.... -
Hello everyone,
I am very new to the BIOS scene and this is my first time doing this, so far:- I have dumped the bin file and verified it using a CH341 (not with the clip) and AsProgrammer.
- I opened it using two different Hex Editors:
- HxD.
- ImHex.
- I have looked online for info/tutorial on similar models (couldn't find anything for the exact model), and the Strings/Hex Values to search i found count find the password block
- I tried comparing the dumped file and a black BIOS from HP website for the exact model, there were to many differences it would take me ages to go through
02-27-2025, 04:18 PM -
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but... -
Hi, I'm pulling my hair out with this x86 network device.
bios info: AMI aptio V
Hardware: CASwell COB-H500
its OEM product, no support is available.
Device has no monitor output, Screen is redirected to serial port(VT100).
I have already tried the list below.
- cmospwd *-> no luck
- I read the BIOS using ch341, and checked with UEFITool, I thought I could find something useful. All I could find was the invalid part, which was "161406223039397D161A17781D6065657C19"
I used this https://www.dcod...02-11-2023, 11:47 AM
Comment