Hello.
I have received a GPU for 50GBP . As non-tested. I cleaned it before testing, i plugged it in , and i heard a "PUFF" sound. I saw a capacitor was blown .
So i had measured the next to it, to find the "colprit" .
I have ordered 3x SMD 150 with 16volts SMD.
C547 & C558 was blown.
I replaced them .
I plugged it in , and now again it has blown the C547 (C548 is fine) .
But the C547 ,melted.
As you will see in the picture like hirosima nagasaki.
Do we have any ,way of seeing what is the "problem" or even if i have used the correct capacitors ,maybe i did a mistake ?
Thanks
I have received a GPU for 50GBP . As non-tested. I cleaned it before testing, i plugged it in , and i heard a "PUFF" sound. I saw a capacitor was blown .
So i had measured the next to it, to find the "colprit" .
I have ordered 3x SMD 150 with 16volts SMD.
C547 & C558 was blown.
I replaced them .
I plugged it in , and now again it has blown the C547 (C548 is fine) .
But the C547 ,melted.
As you will see in the picture like hirosima nagasaki.
Do we have any ,way of seeing what is the "problem" or even if i have used the correct capacitors ,maybe i did a mistake ?
Thanks
Comment