What caps originaly come in the k7t turbo ver 3. The page for the caps kit for this board is a little confusing seeing how the list gives 4 4700s and 2 3300s and 2 2700s yet after that it says that 2 3900s will be substituted with 4700s. Where did the 3900s come from, this would mean the kit comes with 6 4700s not four and the 2700s would be substituted with 3300s which means it comes with 4 3300s instead of 2. I have the mobo but it only has the 4 4700s and 9 1000s on it. what are the other 4 caps that go on the board originally, and what do I replace them with?
Original caps for k7t turbo ver3
Collapse
X
-
Tags: None
-
Re: Original caps for k7t turbo ver3
They used non-original size caps.
A link to where you saw that would help.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Related Topics
Collapse
-
Hello guys.
Im looking for schematic and boardview to ASUS TURBO 2080TI 11GB. Is the same as EVGA board....1 Photo-
Channel: BIOS & Schematic Requests!
-
-
by ktmmotocrossGuys i need BV and schema for this card - Asus RTX3070 Turbo CG142PL...
-
Channel: BIOS & Schematic Requests!
-
-
by ktmmotocrossHello.
Have this Asus RTX3070 Turbo that have core stuck at 210MHz and have weird power reading in GPU-Z. I reworked power ic and core power controller but nothing changed
Owner said he dropped it
any hint?... -
by krstaSo, where to start.
I bought EVGA GTX 970 and Asus GTX 970 Turbo for 30 Euros total (warranty stickers were untouched).
The EVGA one has a short on 12V external power rail on high side mosfet of the Vcore, ordered low, high side ones and mosfet driver just in case because it takes 20-30 days for it to come from China. When they arrive ill post the result.
The Asus one is pain in the ass.
https://imgur.com/kjHzBi3
https://imgur.com/G29eh7n
Before disassembling the card i measured resistances and all that i could reach.... -
- Loading...
- No more items.
Comment