This board is an all Japanese board, but has the fatal HN(M)s in the VRM position. (strangely enough, the VRM is across the board from the power plug)
Polymer caps - PS3D1, 560, 4v (Qty 2) (8mm)
PS3DY, 560, 4v (Qty 1) (might be the same?)
6.3v, 820uF, (8mm) Qty 6 (exploded)
16v, 1000uF (10mm) Qty 3 (Rubycon ZL - has one unfilled hole for a fourth)
6.3v, 1500uF (10mm) Qty 1 (Rubycon ZL)
25v, 220uF (8mm) Qty 1 (Nichicon VR(M))
6.3v, 820uf (8mm) Qty 1 (Rubycon MBZ)
16v, 470uF (8mm) Qty 1 (Nichicon VR(m))
10v, 470uF (6mm) Qty 5 or 6.
25v, 100uF (6mm) Qty 8-10 (hard to tell with the 6mm ones)
I'm going to ignore the five or six 4mm caps.
Polymer caps - PS3D1, 560, 4v (Qty 2) (8mm)
PS3DY, 560, 4v (Qty 1) (might be the same?)
6.3v, 820uF, (8mm) Qty 6 (exploded)
16v, 1000uF (10mm) Qty 3 (Rubycon ZL - has one unfilled hole for a fourth)
6.3v, 1500uF (10mm) Qty 1 (Rubycon ZL)
25v, 220uF (8mm) Qty 1 (Nichicon VR(M))
6.3v, 820uf (8mm) Qty 1 (Rubycon MBZ)
16v, 470uF (8mm) Qty 1 (Nichicon VR(m))
10v, 470uF (6mm) Qty 5 or 6.
25v, 100uF (6mm) Qty 8-10 (hard to tell with the 6mm ones)
I'm going to ignore the five or six 4mm caps.