Few Abit ZM6 mobos

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wigyori
    Member
    • Jan 2005
    • 25
    #1

    Few Abit ZM6 mobos

    Hi,

    I think everybody knows the layout, ZX chipset, shitty Tayeh caps, no bulging, but the boards are dead. Any idea?

    Thanks in advance,
    -w-
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Foetuss
      Recap motherboards :: Abit KG7-LITE and Soltek SL-75FRN2-L
      by Foetuss
      Hi all

      Hope this is in the correct place.

      I'm planning on recapping both motherboards. I actually already ordered recplament caps for them, where I will be changing out most for poly's.
      Could use some double checking to see if I'm not doing something stupid .

      Pictures of the boards are attached.
      What I will be replacing with what : (planned)

      Soltek Golden ::
      4 1500µF 16V 10mm (5mmL) KZG => APSG160ELL152MJ16S (Chemi-Con 1500µF 16V)
      6 3300µF 6.3V 10mm (5mmL) KZG => APSG160ELL272MJ20S (Chemi-Con 2700µF 16V)...
      2 Photos
      01-18-2025, 11:44 AM
    • ziplock
      Abit BE6-II motherboard
      by ziplock
      Greetings,

      I have an Abit BE6-II motherboard that posts sporadically with the bare minimum components installed - CPU, RAM, PSU, and a Keyboard. I know it posts when the speaker beeps. Re-seating the components has no effect.

      I thought the sporadic posting might be capacitor related. Upon inspection, non of the caps are bulged or leaking and they are all original. So, I pulled them ALL. While the ESR is OK, over half of them are leaking current between 1 and 2 mA. The biggest offenders are way out of spec, like a 1500uf / 6.3V measuring 2600uF and many of the 820uF caps...
      04-20-2025, 02:09 PM
    • Document Archive
      ABit IP35 Pro Motherboard Schematic
      by Document Archive
      ABit IP35 ProABit IP35 Pro Motherboard Schematic
      A motherboard based on the Intel P35 Bearlake-P+ RAID chipset....
      10-31-2024, 02:06 PM
    • tbalint3
      Abit ST6-Raid repair
      by tbalint3
      Hello All,

      I am trying to repair an old Abit ST6-R motherboard.

      The symptoms are the following:
      I got it in a non-working state. I was told that it sometimes turned on, but many times just the CPU fan was spinning and no other signs of life, the board didn't POST, and now it doesn't POST at all.

      It was full of bulged electrolytic capacitors, so I replaced all of them with new Low-ESR ones, but it didn't solve the problem.
      If I install a CPU in the S370 socket, only the fans are spinning and no POST. There are no beep codes even if the RAM DIMMs...
      Measurements on the MOSFETs' legs
      3 Photos
      09-01-2024, 10:03 AM
    • N3Star
      Abit IC7 no POST 2nd battle
      by N3Star
      Hello,
      previously I gave up on this MoBo, but here we are again. For starters I'll give a link to previous thread: https://www.badcaps.net/forum/showthread.php?t=95433
      What has changed:
      - I still don't have a PCI GPU, but I have a PCI dignostic board
      - I measured the temperature and drain resistances of these hot MOSFETs:
      (right) 3.3V line: 100Ohms, gets up to ~80C,
      (left) 1.5V line: 430Ohms, gets up to ~65C
      What PC diagnostic says:
      -without GPU: goes through all post codes, keyboard is responsive, after hitting F1 key post codes go all...
      09-24-2022, 03:43 PM
    • Loading...
    • No more items.
    Working...