So I have a bunch of computers with D865PERL mobos which all have similar caps that have either buldged or burst. Their ages match perfectly with the bad batch of Nichicon caps that were supposedly overfilled and burst prematurely. Unfortunately, given the age of these boards, it's not obvious what the replacement would be for these caps. Suggestions on good equivalent replacements?
The caps (had to tape measure the dimensions so they may be rough):
Nichicon HM(M) 2200uf 10V ~10mm(d) x 22mm(h)
Nichicon HN(M) 820uf 6.3V ~8mm(d) x 20mm(h)
I'm thinking http://www.digikey.ca/product-detail...MPD-ND/2428109 for the 820uf although the dimensions seem different (much shorter at 8mm), the ripple current seems okay? I'm totally lost for the 2200uf, I can't even find specs on these guys or ones with similar dimensions.
The caps (had to tape measure the dimensions so they may be rough):
Nichicon HM(M) 2200uf 10V ~10mm(d) x 22mm(h)
Nichicon HN(M) 820uf 6.3V ~8mm(d) x 20mm(h)
I'm thinking http://www.digikey.ca/product-detail...MPD-ND/2428109 for the 820uf although the dimensions seem different (much shorter at 8mm), the ripple current seems okay? I'm totally lost for the 2200uf, I can't even find specs on these guys or ones with similar dimensions.
Comment