Nvidia RTX 3090 FE

[Aqua_Angel]

Good day there.
1- I was wondering if i could get the Boardview for the RTX 3090 FE as i just received a GPU but i have no idea what some of the components values are.

2- Does anyone know the actual smd Resistors that are at the bottom right of the GPU CORE "GA102-300-A1" ripped 2 SMD resistor while doing a service and looking all over the place for the actual value. since i can't get the core anywhere, i will order them from Digikey.
some say it is a 23 ohm and some say it is a 30 ohm. Not sure which one they are and what are the tolerance,temp and all. i have no clue

Thank you

[ktmmotocross]

u did not see that is all capacitors?

[Aqua_Angel]

u did not see that is all capacitors?

When i use my Multimeter? caps gives me no value, when i use it in Ohm mode? it gives me value. but if they are capacitors? i'm trying to find out the value so i can order the right parts for it so i can bring this card back to life.

unless you have a RTX 3090 the you could take apart and take the measurement?

[ktmmotocross]

good multimeters mostly have capacitor measuring mode

[Aqua_Angel]

Still nothing? there is no one out there that has one taken apart that can take the measurement so i can revive my card?

[ktmmotocross]

its only capacitors. i bet most others have simmiliar value. measure others and pic capacity

[Aqua_Angel]

Was able to get the 2 caps that i ripped off another GPU core with the same value. the GPU is back to life. passed all the test on the stress test. i now have a back up GPU. lol