First of all, I'm sorry for my lack of English.
The part I found the problem in the picture below is no2.
When I check with the bell tester, there is a short circuit. And I checked the bell tester on the no1. The no1 is open on both sides, and the numbers keep increasing.
In my opinion, the capacitor of no2 is the problem, is it correct?
The part I found the problem in the picture below is no2.
When I check with the bell tester, there is a short circuit. And I checked the bell tester on the no1. The no1 is open on both sides, and the numbers keep increasing.
In my opinion, the capacitor of no2 is the problem, is it correct?
Comment