MSI BX2 (MS-6119) - Bad caps

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Topcat
    The Boss Stooge
    • Oct 2003
    • 16956
    • United States
    #1

    MSI BX2 (MS-6119) - Bad caps

    Another older Slot-1 motherboard with bad Chhsi caps. This board required the replacement of 19 caps, listed as follows:

    (9) 1500uF 6.3v 10mm
    (4) 1000uF 6.3v 10mm (I used 10v replacements)
    (6) 1000uF 6.3v 8mm (I used 10v once again)

    Once again, another success story!

    BEFORE:




    AFTER:


    <--- Badcaps.net Founder

    Badcaps.net Services:

    Motherboard Repair Services
    ----------------------------------------------
    Badcaps.net Forum Members Folding Team
    http://folding.stanford.edu/
    Team : 49813
    Join in!!
    Team Stats
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • momaka
      Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
      by momaka
      I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

      For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

      https://www.badcaps.net/filedata/fetch?id=3591771


      https://www.badcaps.net/filedata/fetch?id=3591772

      It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

      https://www.badcaps.net/filedata/fetch?id=359177...
      03-12-2025, 03:42 PM
    • eryjus
      Heathkit IO-4205 Power Supply Caps
      by eryjus
      Hello,

      First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

      I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

      I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
      ...
      05-10-2023, 11:21 AM
    • ssl6
      MSI K7T266 Pro (Ver. 1.0)
      by ssl6
      Hey Everyone,

      Long time lurker, but I think this is my first time posting.

      Just looking for some assistance on identifying some suitable replacement capacitors for an MSI K7T266 Pro (Ver. 1.0). I just got my hands on two of them actually, both working but one has some visibly bulging capacitors and the other has a few that I can't tell for sure if they're bulging because it's faint at best if they are.

      I'll be honest I don't fully understand much on capacitor spec sheets beyond voltage and capacitance but I can solder like nobodies business so I've...
      11-09-2023, 01:00 PM
    • Paxman_Swede
      Identifying caps on an old Zoom 9000
      by Paxman_Swede
      Hello!

      I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

      The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

      I have studied the board and...
      01-14-2025, 09:51 AM
    • SwedishDiesel
      Dell Optiplex GX260 - Advice Needed for Polymodding Motherboard
      by SwedishDiesel
      Howdy folks,

      I have an Optiplex GX260 that blew a couple of those troublesome Nichicon HM series (ultra low ESR) electrolytic capacitors. Because said caps are obsolete, they are pretty much impossible to find on the market; I did find a listing for some but I believe they are counterfeit. I feel the easiest thing to do would be to replace all the blown caps with polymer ones. I am by no means an expert in electronics, and I've found a fair bit of conflicting information, so any guidance or confirmation would be greatly appreciated. While from a practical standpoint it's not worth...
      10-30-2021, 12:47 AM
    • Loading...
    • No more items.
    Working...