M4N82 Deluxe. Help with Cap identity

[jetmech]

Hi there,

I have the M4N82 Deluxe MB. Someone went and jammed a large video card in the bottom Pci-e slot and knocked 3 small VRM Caps off the board. There is now no audio output. The only option I have is the digital output. None of the jacks work and there is no jack recognition either. I'm assuming it's the broken caps that are at fault. I tried soldering in different caps of the same voltage (I think) from another board but no joy. Do you know where I can find actuall replacements. From what I can see, the capacitor in question is:

EAO 01 or EA 001
100
16V

If someone can identify that I'd really appreciate it.

Thank you

[selldoor]

Re: M4N82 Deluxe. Help with Cap identity

A picture would help , although id guess they are 100uf 16v - did you get the polarity right?
Could be from here http://www.apaq.com.tw/products/ap_conarea01_en.htm

[jetmech]

Re: M4N82 Deluxe. Help with Cap identity

That's exactly what they look like but instead of 180 they say 100. Can you actually purchase from that sight? I'm sure polarity is right. I copied off the other Asus board. Negative was on the clear side of the 1/2 moo
And so are the ones on the M4n board

[selldoor]

Re: M4N82 Deluxe. Help with Cap identity

I shouldnt think so, they may have an agent in the us.
I dont know about motherboard caps, these might do but perhaps wait and see if there is any more input or if anyone has a datasheet for your old caps.
http://www.digikey.ca/product-detail...3053-ND/758484

[c_hegge]

Re: M4N82 Deluxe. Help with Cap identity

^
Yes, those caps would work as replacements. They chemi-con PSA, and are used a lot on motherboards.