I don't own the board, but you can find pretty detailed pics in the following thread:-
http://www.xtremesystems.org/forums/...d.php?t=103808
http://www.xtremesystems.org/forums/...d.php?t=103808
-
Q6700 @ 3.6 GHz
Zippy GSM-6600P
Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
Abit IP35Pro
ATi HD4870 -
Re: Foxconn C51XEM2AA with Teapo caps
only little ones. i would be more concerned about that bunch of light green ones near the sata connectors, they look like Lelon (havent seen them for a long time)
the rest of the caps are fine - rubycon mcz, fujitsu fpcap and chemicon -
Re: Foxconn C51XEM2AA with Teapo caps
Well, if that's the case, DFI are claiming that they use 100% Japanese caps (probably Nichion), so I'm going to put DFI on my list of Conroe boards, along with ASUS.
Is this correct?
Rubycons are the ones with the gold stripe.
Yellow are Chemicons
Green ones are Lelon
Teapo's are clearly visible.
Which ones are Fujitsu?Q6700 @ 3.6 GHz
Zippy GSM-6600P
Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
Abit IP35Pro
ATi HD4870Comment
-
Re: Foxconn C51XEM2AA with Teapo caps
The yellow ones are Fujitsu.
Lelon
Comment
-
Re: Foxconn C51XEM2AA with Teapo caps
That bad eh?
If the capacitor layout is broken down location-wise, do you predict VCore or VDIMM drooping? If you were a board manufacturer, how would you priorotize capacitor placement?Q6700 @ 3.6 GHz
Zippy GSM-6600P
Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
Abit IP35Pro
ATi HD4870Comment
-
Re: Foxconn C51XEM2AA with Teapo caps
Lelon "quality" is comparable to GSC and Chhsi.Comment
-
I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.
For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).
https://www.badcaps.net/filedata/fetch?id=3591771
https://www.badcaps.net/filedata/fetch?id=3591772
It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:
https://www.badcaps.net/filedata/fetch?id=359177... -
Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though.
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
-
Hello,
First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.
I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.
I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
... -
Hello!
I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.
The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.
I have studied the board and... -
I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
Comment