BX133 help with caps here in Brazil... ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gaucho
    New Member
    • Apr 2008
    • 3
    #1

    BX133 help with caps here in Brazil... ?

    Hello,

    I'm a fan of this good old board (have 3 of them here now, one 1.00 and two 1.01), but all of them are failing to properly work

    One of the 1.01 dos not even pass signal do video. I tried everything possible, changing all devices plugged to it, CPUs, reset CMOS, changed all jumpers, etc. NO VISIBLE caps damaged (or other eletronic part). Any ideas?

    The other 1.01 throws a "Hardware malfunction. System halted" error message while in the midst of the boot. Can't get to the logon screen of WinXP. Installed Win98SE successfull, but strange erros take place, like device drivers getting corrupted/uninstalled misteriously, video starts to get choppy and stained as with time, etc. This look symptom of bad hardaware, but again I can't find a trace looking on the board even with a magnifier!

    Do you guys have any idea?

    Best regards from Brazil,


    Gaucho
    Tags: None
    • PCBONEZ
      Grumpy Old Fart
      • Aug 2005
      • 10661
      • USA
      #2
      Re: BX133 help with caps here in Brazil... ?

      Not all bad caps bloat.
      What caps are on it?
      What are the make/model numbers of the boards?
      Mann-Made Global Warming.
      - We should be more concerned about the Intellectual Climate.
      -
      Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
      - Dr Seuss
      -
      You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
      -

        Comment

        Previous template Next

        Related Topics

        Collapse
        • momaka
          Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
          by momaka
          I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

          For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

          https://www.badcaps.net/filedata/fetch?id=3591771


          https://www.badcaps.net/filedata/fetch?id=3591772

          It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

          https://www.badcaps.net/filedata/fetch?id=359177...
          03-12-2025, 03:42 PM
        • eryjus
          Heathkit IO-4205 Power Supply Caps
          by eryjus
          Hello,

          First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

          I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

          I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
          ...
          05-10-2023, 11:21 AM
        • Paxman_Swede
          Identifying caps on an old Zoom 9000
          by Paxman_Swede
          Hello!

          I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

          The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

          I have studied the board and...
          01-14-2025, 09:51 AM
        • captain150
          Help with switching power supply caps
          by captain150
          I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
          I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
          03-16-2025, 07:34 PM
        • Foetuss
          Gigabyte GA-6OXT :: caps question
          by Foetuss
          Good evening

          I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
          Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

          But I was also suprised about the bigger boys, which are 330µF 25V.
          Could it be they used 25V caps because they were cheaper / available at that time?...
          02-11-2025, 12:22 PM
        • Loading...
        • No more items.
        Working...