need a lil advice on recapping ECS HP MCP61PM-HM

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • bruferrit
    Senior Member
    • May 2011
    • 50
    #41
    Re: need a lil advice on recapping ECS HP MCP61PM-HM

    OST are all RLS
    TK's are ATWB for the 6.3v 1800uf & ATWY for th 16v 1800uf
    G-lux are SM (approx 8mm x 13mm) all same size.

    How would I test to see if the Vcore is in parellel

    Just upgrade the Vcore to poly. (Would it be worth it to do the whole board?)

    I do not know if #3 is in Vcore or not.

    I did get a reply from C_hegg on what he used on his board.

    NHN 1800@6.3 8 x 20Nichicon 1800uf 6.3v 8mm HN series
    NHZ 1800@16 10 x 25 Nichicon 1800uf 16v 10mm HZ series
    NHM 1000@6.3 8x11 1000uF 6.3v 8mm HM series
    NHN 470@16 8x13 470uF 16v 8mm HN series
    United Chemi-Con 820uF 2.5v 8mm Polymer Capacitor

      Comment

      • PCBONEZ
        Grumpy Old Fart
        • Aug 2005
        • 10661
        • USA
        #42
        Re: need a lil advice on recapping ECS HP MCP61PM-HM

        Originally posted by bruferrit
        How would I test to see if the Vcore is in parellel
        I do not know if #3 is in Vcore or not.
        Resistance checks.
        [If] + is connected to + [and] - is connected to - [then] they are in parallel.
        -
        That Vcore row are all in parallel.
        What I need to know if is #3 is in parallel with them.

        Need to know where you want to buy from so I can see what they have in stock.
        I recommend Badcaps.net or Mouser.com for this set of caps unless you want to buy from multiple places.

        I'll be back a bit later.
        Need to do some family stuff.
        .
        Mann-Made Global Warming.
        - We should be more concerned about the Intellectual Climate.
        -
        Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
        - Dr Seuss
        -
        You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
        -

          Comment

          • bruferrit
            Senior Member
            • May 2011
            • 50
            #43
            Re: need a lil advice on recapping ECS HP MCP61PM-HM

            I do not think the cap in group #3 is in the Vcore here is exactly what Hegg said
            For the 16v 1800uF Caps (there are 3 of them), use these
            For the row of 7 caps next to the CPU (a mix of polys and electrolytics), use these (it is a tight squeeze getting them in as their legs are slightly thicker, but they do work)
            For the other 1800uF 6.3v caps (I think there are 4 or 5), use these
            For all the 1000uF 6.3v caps, use these
            for all the 470uF 16v caps, use these

              Comment

              • PCBONEZ
                Grumpy Old Fart
                • Aug 2005
                • 10661
                • USA
                #44
                Re: need a lil advice on recapping ECS HP MCP61PM-HM

                G-Luxon SM are GP caps. Replacing them with HN is -extreme- over-kill.
                If you like that idea then use his list.
                It's over-kill but obviously will at least work on that board so go for it.
                .
                Mann-Made Global Warming.
                - We should be more concerned about the Intellectual Climate.
                -
                Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                - Dr Seuss
                -
                You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                -

                  Comment

                  • bruferrit
                    Senior Member
                    • May 2011
                    • 50
                    #45
                    Re: need a lil advice on recapping ECS HP MCP61PM-HM

                    PCBONEZ I just want to get it right and do the job correctly. I do not know how to test the cap in #3 to see if it is in parallel. I do know why u ask the questions you do, to get the job correct so there are no problems down the road.

                    Bruce

                      Comment

                      • PCBONEZ
                        Grumpy Old Fart
                        • Aug 2005
                        • 10661
                        • USA
                        #46
                        Re: need a lil advice on recapping ECS HP MCP61PM-HM

                        After a few distractions here I'm back to working out a list.
                        .
                        Mann-Made Global Warming.
                        - We should be more concerned about the Intellectual Climate.
                        -
                        Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                        - Dr Seuss
                        -
                        You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                        -

                          Comment

                          • PCBONEZ
                            Grumpy Old Fart
                            • Aug 2005
                            • 10661
                            • USA
                            #47
                            Re: need a lil advice on recapping ECS HP MCP61PM-HM

                            ~~~~~~~~
                            VRM-High: 1800/16v - TK 10x25mm ... Ripple = 3230 / ESR = .011
                            ---
                            Lytic:
                            Nichicon HZ: UHZ1C182MPM - 1800/16v - 10x25mm... Ripple = 3190 / ESR = .009
                            http://www.mouser.com/ProductDetail/...SGh7iKefNMU%3d
                            https://cdn.badcaps-static.com/pdfs/...43c4079d93.pdf

                            Poly:
                            Nichicon LF: PLF1C471MDO1 - 470/16v - 10x13mm ... Ripple = 6100 / ESR = .009
                            [4x 330uF -or- 3x 470uF is the common configuration on mobos that come original with polymers here. Since you have 3 'spots' use 470uF.]
                            http://www.mouser.com/ProductDetail/...%2fggptTciQ%3d
                            https://cdn.badcaps-static.com/pdfs/...fd1de1303c.pdf


                            ~~~~~~~~
                            VRM-Vcore:
                            1800/6.3v - TK 6.3v 8x20mm ... Ripple = 2100 / ESR = .015
                            Poly: [replacing only the lytics]
                            Nichicon R5: 820uF/2.5v - RR50E821MDN1 - 8x11.5mm - Ripple 6630 / ESR = .005
                            http://www.mouser.com/ProductDetail/...Vih%252btY0%3d
                            https://cdn.badcaps-static.com/pdfs/...d175462349.pdf


                            ~~~~~~~~
                            Non-Vcore 1800's
                            1800/6.3v - TK - 8x20mm ... Ripple = 2100 / ESR = .015
                            Nichicon HN - UHN0J182MPD6 - 1800/6.3v - 8x20mm - Ripple = 2220 / ESR = .012
                            http://www.mouser.com/ProductDetail/...NgHrZlUloDw%3d
                            https://cdn.badcaps-static.com/pdfs/...69df1e6a59.pdf


                            ~~~~~~~~
                            1000/6.3v - OST RLS - 8x14mm - Ripple = 630 / ESR = .070
                            Nichicon HD - UHD1A102MPD - 1000/10v - 8x20mm - Ripple = 1250 / ESR = .041
                            http://www.mouser.com/ProductDetail/...J9Jl%252bZg%3d
                            https://cdn.badcaps-static.com/pdfs/...653ba34560.pdf



                            ~~~~~~~~
                            470/16v - G-Luxon SM - 8x11mm - Ripple = 315 / ESR = N/A
                            Nichicon PM - UPM1C471MPD1TD - 470/16v - 8x20mm - Ripple = 770 / ESR = .090
                            http://www.mouser.com/ProductDetail/...UlBGaxHBUuE%3d
                            https://cdn.badcaps-static.com/pdfs/...d50db6d4ae.pdf

                            .
                            .........
                            I stuck links to the data sheets in there so you can see what to look at.
                            .
                            Last edited by PCBONEZ; 08-09-2011, 02:31 AM.
                            Mann-Made Global Warming.
                            - We should be more concerned about the Intellectual Climate.
                            -
                            Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                            - Dr Seuss
                            -
                            You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                            -

                              Comment

                              • bruferrit
                                Senior Member
                                • May 2011
                                • 50
                                #48
                                Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                Thank you very much PCBONEZ, I will post a list of what I am ordering just to make sure I got it right.

                                  Comment

                                  • PCBONEZ
                                    Grumpy Old Fart
                                    • Aug 2005
                                    • 10661
                                    • USA
                                    #49
                                    Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                    For future reference you may find this useful:
                                    https://www.badcaps.net/forum/showpo...1&postcount=17
                                    Would have posted earlier but I forgot where it was.
                                    .
                                    Mann-Made Global Warming.
                                    - We should be more concerned about the Intellectual Climate.
                                    -
                                    Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                                    - Dr Seuss
                                    -
                                    You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                                    -

                                      Comment

                                      • bruferrit
                                        Senior Member
                                        • May 2011
                                        • 50
                                        #50
                                        Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                        VRM High
                                        Nichicon LF: PLF1C471MDO1 - 470/16v - 10x13mm ... Ripple = 6100 / ESR = .009 (Qty: 3)
                                        VRM-Core
                                        Nichicon R5: 820uF/2.5v - RR50E821MDN1 - 8x11.5mm - Ripple 6630 / ESR = .005 (Qty: 4)
                                        Non-Vcore 1800's
                                        Nichicon HN - UHN0J182MPD6 - 1800/6.3v - 8x20mm - Ripple = 2220 / ESR = .012 (Qty:5)
                                        OST replace
                                        Nichicon HD - UHD1A102MPD - 1000/10v - 8x20mm - Ripple = 1250 / ESR = .041 (Qty: 8)
                                        G-Lux replace
                                        Nichicon PM - UPM1C471MPD1TD - 470/16v - 8x20mm - Ripple = 770 / ESR = .090 (Qyt: 5)

                                          Comment

                                          • PCBONEZ
                                            Grumpy Old Fart
                                            • Aug 2005
                                            • 10661
                                            • USA
                                            #51
                                            Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                            Looks right.
                                            Mann-Made Global Warming.
                                            - We should be more concerned about the Intellectual Climate.
                                            -
                                            Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                                            - Dr Seuss
                                            -
                                            You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                                            -

                                              Comment

                                              • bruferrit
                                                Senior Member
                                                • May 2011
                                                • 50
                                                #52
                                                Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                                Got the caps but using a 25 watt iron is not enough to get the caps out without a struggle, so what is a good wattage iron to use? 40, 60?

                                                  Comment

                                                  • PCBONEZ
                                                    Grumpy Old Fart
                                                    • Aug 2005
                                                    • 10661
                                                    • USA
                                                    #53
                                                    Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                                    Most people prefer a 50-60 watt.
                                                    Mann-Made Global Warming.
                                                    - We should be more concerned about the Intellectual Climate.
                                                    -
                                                    Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                                                    - Dr Seuss
                                                    -
                                                    You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                                                    -

                                                      Comment

                                                      • bruferrit
                                                        Senior Member
                                                        • May 2011
                                                        • 50
                                                        #54
                                                        Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                                        thanks Bonez! BTW How you doing?!

                                                          Comment

                                                          • bruferrit
                                                            Senior Member
                                                            • May 2011
                                                            • 50
                                                            #55
                                                            Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                                            ok Update, on this MB, Finally got a Soldering iron station and swapped out all the caps listed above. It is now up and running like a champ w/ 4gigs ram and a single core AMD 3500+

                                                              Comment

                                                              • PCBONEZ
                                                                Grumpy Old Fart
                                                                • Aug 2005
                                                                • 10661
                                                                • USA
                                                                #56
                                                                Re: need a lil advice on recapping ECS HP MCP61PM-HM

                                                                Congrats!
                                                                .
                                                                Mann-Made Global Warming.
                                                                - We should be more concerned about the Intellectual Climate.
                                                                -
                                                                Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
                                                                - Dr Seuss
                                                                -
                                                                You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                                                                -

                                                                  Comment

                                                                  Previous 1 2 3 template Next

                                                                  Related Topics

                                                                  Collapse
                                                                  • Gwynz
                                                                    First time recapping a motherboard, need advice!
                                                                    by Gwynz
                                                                    Hey guys, I just picked up an old Athlon motherboard (Chaintech 7AJA2) to build a vintage PC system around and noticed it had a leaking cap and a few others that appear to be bulging




                                                                    It does boot up fine though, just finished installing Windows XP and it ran through a few 3dfx demos successfully (using a Voodoo3 3000 AGP card) but it does seem to have issues when I have more than one stick of RAM installed, should I also change out the little squat capacitors that are around the DIMM slots even though they appear fine?




                                                                    ...
                                                                    04-04-2022, 11:44 PM
                                                                  • proxneo
                                                                    Recapping Sony ICF-SW55 - verifying cap values
                                                                    by proxneo
                                                                    Dear reader

                                                                    I am performing a repair on a Sony ICF-SW55, which includes recapping (some) of the SMD capacitors on the mainboard. I am looking for verification of their values. At the moment, I'm 95% sure I've got the right values, but it is hard to find some official, credible or multiple independant sources on this.

                                                                    At the moment, I have selected replacements based on the following list of values:

                                                                    3 x 470uF 10VDC
                                                                    3 x 4.7uF 35VDC
                                                                    4 x 47uF 50VDC
                                                                    8 x 22uF 6.3 VDC
                                                                    1 x 220uF 6.3VDC
                                                                    5 x 100uF 6.3VDC

                                                                    Which...
                                                                    06-21-2023, 12:38 AM
                                                                  • chazzo
                                                                    CH341 programmer advice, including jumpers seemingly reversed
                                                                    by chazzo
                                                                    I’d appreciate some very basic advice on CH341x programmers. I know this topic comes up from time to time, but stuff changes, so I hope a refresh is in order. In particular, I see some unexpected things happening with jumper positions.

                                                                    [My plan is to learn to read and write 24CO2 EEPROMs via I2C. The first target is the one in my Uni-T clamp meter, but before tackling that I have some brand-new EEPROMs to practice on.]

                                                                    I have two basic Chinese programmers. One is the blue board with a CH341A and two rows of pin headers. To my untrained eye it looks like all the others....
                                                                    Today, 08:15 AM
                                                                  • Jidis
                                                                    Need T-Con Advice (Vizio P602ui-B3)
                                                                    by Jidis
                                                                    Hi all,

                                                                    I made a big-ass mess here of my father's beloved P602, and I'm trying to figure out if I should order a batch of overpriced ribbons or if I'd just be throwing more good money at the bad.

                                                                    He woke up recently to a bunch of white bars going down the right side of the screen. From what I'd seen in these places, I figured the T-con board has gone out or has a bad connection. I took the back off and gently poked at the socketed ribbons and sure enough, got the image back. It was mainly the far left ribbon, and it would snap back to stripes if I let off the pressure....
                                                                    09-22-2025, 05:10 PM
                                                                  • zlr8r
                                                                    Advice on newer EC chip programming eg. MEC5107-LJ BGA
                                                                    by zlr8r
                                                                    Hey all, was wanting to know what cheapest option is for programming EC chips such as the MEC5107-LJ

                                                                    i searched online and found such programmers as the SVOD4, Vertyanov Successor , and the RT809h type but didn’t see this particular BGA EC chips listed? So hoping for some advice here , cheers.
                                                                    09-16-2025, 09:54 AM
                                                                  • Loading...
                                                                  • No more items.
                                                                  Working...