Hey, I have this GPU (MSI GeForce RTX 4070 Ti GAMING X TRIO 12G). After a lightning struck all dispaylports don´t work anymore but the one hdmi does in fact function properly. Has anyone a suggestion, what the error may be? Is it the GPU core itself that is damaged or is it a simple replaceable chip that is fried?
RTX 4070 Ti GAMING X TRIO 12G All displayports failed after lightning struck
Collapse
X
Related Topics
Collapse
-
by ahmedtouHi everyone,
help me please
I have an HL-DT-ST BD-RE GGW-H20N with ROM version: XA02.
When I tried to burn a 25GB Blu-ray disc using ImgBurn, I got an error.
I will share all the details with you, including the disc information.
Code:HL-DT-ST BD-RE GGW-H20N XA02 (ATA) Current Profile: BD-R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 12,219,392 Free Space: 25,025,314,816 bytes Free Time: 2715:27:17 (MM:SS:FF) Next
-
Channel: General Computer & Tech Discussion
-
-
The GeForce RTX 4070 is a high-end graphics card by NVIDIA, launched on April 12th, 2023. Built on the 5 nm process, and based on the AD104 graphics processor, in its AD104-250-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 4070. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The AD104 graphics processor is an average sized chip with a die area of 294 mm² and 35,800 million transistors. Unlike the fully unlocked GeForce RTX 4070...
-
Channel: Schematics and Boardviews
-
-
Just starting out in electronics repair and teaching myself as I go.
I have here a Corsair RM650 ATX PSU, which I'm treating as a learning project that if successful may be used in my PC.
Fuse was blown, probable power surge from lightning, followed the circuit and found, a dead relay and all the diodes and resistors around the bridge rectifier shorted. Rectifier and MOSFETs seem fine on the LCR.
Also found these tiny diodes on the other side, a few shorted, the rest seem fine. But they're not all marked as Zener on the pcb. So I'm unsure what these should be replaced with.... -
by Redrebel10Old friend was throwing this away after lightning struck their house. Standby power light is on but no backlights will come on. However when I disconnect the main board from the power boards, the backlights immediately come on. This leaves me to believe problem is with the main board. Any help would be greatly appreciated.
-
Subject: Request for Boardview – RX 6900 XT MSI GAMING Z TRIO
Hello,
I am looking to repair my MSI RX 6900 XT GAMING Z TRIO graphics card and need the boardview to perform an accurate diagnosis.
Would it be possible to provide it to me or let me know where I could obtain it?
Thank you in advance for your help.
Best regards,
Aurelia...-
Channel: BIOS & Schematic Requests!
02-06-2025, 02:21 PM -
- Loading...
- No more items.
Comment