mother asrock h81m-vg4

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • willoriker
    New Member
    • Apr 2016
    • 6
    • spain

    #1

    mother asrock h81m-vg4

    hi to everybody!!
    i have a h81m-vg4 with 3 long beeps, and again and again
    in theory is a defect of ram bank, but i test several ram with the same result
    i check vram (1.5) and is correct, and w/o ram give same error
    these model on include pci-e solt, i couldnt connect any port diagnostic card
    i made a visula diagnostic and find d1 (near to solt ddr3-b1) blow. i check boardview ( i couldnt find shematics) and it seem to be a zener o similar proteccion diode form 5vstd to ground
    any clue??
    tx in advance
  • AL._.EX
    Badcaps Veteran
    • Dec 2022
    • 885
    • Belarus

    #2
    Re: mother asrock h81m-vg4

    Specify the detail on the photo of the motherboard.

    Comment

    • willoriker
      New Member
      • Apr 2016
      • 6
      • spain

      #3
      Re: mother asrock h81m-vg4

      here you have
      Attached Files
      Last edited by SMDFlea; 05-17-2023, 04:51 AM. Reason: Added image to badcaps

      Comment

      • AL._.EX
        Badcaps Veteran
        • Dec 2022
        • 885
        • Belarus

        #4
        Re: mother asrock h81m-vg4

        Originally posted by willoriker
        here you have
        It - resistor, possibly... 0 Om (3VSB - 3VSB_A).

        Comment

        • anikin73
          Senior Member
          • Mar 2022
          • 112
          • singapore

          #5
          Re: mother asrock h81m-vg4

          Ram slot error could be many possibilities. Like pins not good, etc...checking your way might not get anywhere..
          Easiest is clean up ram slot

          Comment

          • soumya199929
            Senior Member
            • Apr 2022
            • 65
            • India

            #6
            Re: mother asrock h81m-vg4

            You are absolutely right it was in fact a zener diode .Take any zener diode from same 5v/3.3v rail of any mobo it will work just fine. Let us know any future updates about repair.

            Comment

            Related Topics

            Collapse

            • Document Archive
              Postcard 32 4-Bit 4-Digit Diagnostic Card PC Analyzer Manual
              by Document Archive
              Postcard 32 4-Bit 4-Digit Diagnostic Card PC Analyzer Manual

              Diagnostic Card is a powerful diagnostic tool for technicians and administrators to troubleshoot
              various problems of IBM compatible PCs. It is easy to install, yet extremely powerful to use. With
              Diagnostic Card in hand, you no longer have to go through tedious and time consuming process of
              trying to figure out what is wrong with your PC hardware. Diagnostic Card will tell you exactly
              what is wrong with your PC in just seconds. It saves you time and money.

              Our new and improved design...
              11-01-2024, 06:29 AM
            • Exim
              ASRock N100M, no picture no boot, but semi-alive
              by Exim
              Hi guys,
              I managed to semi-kill an ASRock N100M board after updating Bios from 1.10 to 2.01. It's a zombie now, dead, but not dead.

              ASRock N100M special features:
              - CPU soldered to board, small Intel 12th gen
              - iGPU
              - four POST LEDs

              Problem after updating Bios to 2.01 using the in-Bios update tool: no picture, no boot.
              I am not sure anymore if it booted at least once successfully after updating the bios to 2.01, maybe not, I can't remember. I think it did not.

              Symptoms:
              - no picture/signal on any of the display connectors,...
              04-01-2025, 02:36 PM
            • MasterCap
              What IC does AsRock usually use to make the PWM signals for GPU fans ?
              by MasterCap
              I have an AsRock Taichi 7900xtx, and the minimum fan speed is way too high at 1000rpm, and thats with it's Quiet BIOS switch on, and me setting the fan profile as low as it goes, while on.

              Now 1 thing I could do is just make some circuit to put in between the fan the the GPU, and leave the fan on all the time, but anytime the GPU is sending the PWM for min speed, I'll just send something lower and quieter.

              But does anyone know what how AsRock usually sends the PWM to the fans on GPUs and mobo's? Is it from the MCU that's often near the 12V inputs and fan jack ? Or is...
              12-28-2024, 08:42 AM
            • nolaryie
              BIOS .bin file for ASRock B450M Steel Legend
              by nolaryie
              Hi, I’m looking for a clean, working BIOS .bin dump (16MB) for the ASRock B450M Steel Legend motherboard.


              I’ve already tried flashing the official ASRock ROM file via CH341A, but it won’t post — I believe the capsule format is incompatible.


              Any BIOS version that supports Ryzen 5 2600 is fine (e.g., P2.30–P3.60).


              If anyone has a working board and can dump the BIOS using CH341A or flashrom, I would really appreciate your help.


              Thank you!
              08-06-2025, 12:01 PM
            • khanhtq0
              Full BIOS Dump for ASRock H310M-HDV Rev 1.02 (MX25L12873F)
              by khanhtq0
              Hello everyone,

              I'm looking for a full BIOS dump (.bin) for the ASRock H310M-HDV Rev 1.02 motherboard. The BIOS chip is a MX25L12873F (128Mb / 16MB).

              I’ve already tried flashing the official BIOS from ASRock (version 1.40 and 3.30), but those are Instant Flash versions and don’t include the full SPI image (e.g. Intel ME Region, Descriptor, etc.). After flashing, the board powers on only when I short PS-ON to ground, and it fails to generate Vcore and 2.5V. Other rails like 1.05V and RAM voltage are present.

              I suspect the original Intel ME and descriptor...
              08-06-2025, 02:14 AM
            • Loading...
            • No more items.
            Working...