Gigabyte B550 Gaming X V2 knocked VRM components :(

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • flusher
    Member
    • Oct 2015
    • 43
    • Ukraine

    #1

    Gigabyte B550 Gaming X V2 knocked VRM components :(

    Hello, just wondering if anyone has the same board to help or have a schematic/boardview so I could restore its VRM circuit, a lot of knocked off components here on bottom side of the board and any mistake would probably burn either CPU or VRM circuit to ashes.

    Mobo is Gigabyte B550 Gaming X V2 rev 1.1

    Here are the pics and I did mark everything I am missing

    Thanks in advance
    Attached Files
  • krsta
    Member
    • Nov 2020
    • 32
    • Croatia

    #2
    Re: Gigabyte B550 Gaming X V2 knocked VRM components

    You have everything you need on the MBO.

    The patterns are repeating.

    Desolder the parts measure them and put new ones on missing pads.

    Comment

    • AL._.EX
      Badcaps Veteran
      • Dec 2022
      • 834
      • Belarus

      #3
      Re: Gigabyte B550 Gaming X V2 knocked VRM components

      Possibly like this:
      Attached Files
      Last edited by AL._.EX; 03-15-2023, 11:38 AM.

      Comment

      • DynaxSC
        Badcaps Veteran
        • Apr 2021
        • 448
        • Poland

        #4
        Re: Gigabyte B550 Gaming X V2 knocked VRM components

        Here you have the exact values:



        eg. 1/6 - means 1 ohm, 6 is probably the case size or maybe power handling, rest is selfexplanatory.
        Attached Files
        Last edited by DynaxSC; 03-16-2023, 04:21 AM.

        Comment

        • flusher
          Member
          • Oct 2015
          • 43
          • Ukraine

          #5
          Re: Gigabyte B550 Gaming X V2 knocked VRM components

          thank you so much guys, I will try to get this looked at soon and report whether it has blow up or work

          Comment

          • flusher
            Member
            • Oct 2015
            • 43
            • Ukraine

            #6
            Re: Gigabyte B550 Gaming X V2 knocked VRM components

            thank you again, especially @DynaxSC. i replaced all the components as you specified on your picture and motherboard works just fine and all phases has good oscillograms!

            Comment

            • Ovi91
              Member
              • Sep 2022
              • 16
              • UK

              #7
              Hi ,I have a board like that but I don't know this part what is it to replace.I attach some pictures if you are able to help because I don't have schematic or a boardwiew.Thanks

              Comment

              • McWhitePink
                Senior Member
                • Apr 2023
                • 94
                • United States

                #8
                Originally posted by Ovi91
                Hi ,I have a board like that but I don't know this part what is it to replace.I attach some pictures if you are able to help because I don't have schematic or a boardwiew.Thanks
                Just the two components? those are capacitors, you can put something like 1uF, it should work, even without those it should work.

                Comment

                • Ovi91
                  Member
                  • Sep 2022
                  • 16
                  • UK

                  #9
                  I don't think they are capacitor,not the big cap market 1R0,in front of him is a part mark with 51x and have 8 pin..

                  Comment

                  • McWhitePink
                    Senior Member
                    • Apr 2023
                    • 94
                    • United States

                    #10
                    Originally posted by Ovi91
                    I don't think they are capacitor,not the big cap market 1R0,in front of him is a part mark with 51x and have 8 pin..
                    You should circle the missing component, I don't know which ones you are refering to. the only two missing components I saw are capacitors.

                    Comment

                    • Zangief
                      New Member
                      • Jun 2024
                      • 6
                      • Australia

                      #11
                      Anyone have a boardview for this motherboard? I really need it.

                      Comment

                      • SMDFlea
                        Super Moderator
                        • Jan 2018
                        • 20311
                        • UK

                        #12
                        Originally posted by Zangief
                        Anyone have a boardview for this motherboard? I really need it.
                        Post your request here -> https://www.badcaps.net/forum/troubl...matic-requests
                        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                        Comment

                        • Zangief
                          New Member
                          • Jun 2024
                          • 6
                          • Australia

                          #13
                          Originally posted by SMDFlea
                          ok, will do 👍

                          Comment

                          Related Topics

                          Collapse

                          Working...