Announcement

Collapse
No announcement yet.

Samsung SyncMaster 760V powers on to white screen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung SyncMaster 760V powers on to white screen

    Hello all and happy holidays. i have said item here today in hopes of repairing with any advise. it powers on to a blueish looking screen. power light stays green. no signal whatsoever. all power boards look good. caps look good. no bulge or leaks noticed. what would be the best place to start?
    Attached Files

    #2
    Re: Samsung SyncMaster 760V powers on to white screen

    Is this monitor going to stand-by mode (amber LED) after cca 10 sec?

    If yes, it looks, like no voltage is going to panel.

    Check voltages at circled places.
    Attached Files

    Comment


      #3
      Re: Samsung SyncMaster 760V powers on to white screen

      sorry late reply.....the power led stays green. no yellow at all.

      added note.....

      i did replace all caps ((6 that are bunched together)) just to see if that would do it. no difference.
      Last edited by starmaxpc; 01-02-2010, 01:20 PM.

      Comment


        #4
        Re: Samsung SyncMaster 760V powers on to white screen

        I have a 912N that goes to white screen when I unplug the analog cable and goes turns off with green light blinking at about 15sec intervals with no display.

        Comment


          #5
          Re: Samsung SyncMaster 760V powers on to white screen

          Originally posted by starmaxpc
          i have said item here today in hopes of repairing with any advise. it powers on to a blueish looking screen. power light stays green. no signal whatsoever. all power boards look good. caps look good?
          trying to bring to life. any ideas. thanks.

          Comment

          Working...
          X