Announcement

Collapse
No announcement yet.

Emprex (Innolux) 22" monitor - how to open?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Emprex (Innolux) 22" monitor - how to open?

    Does anybody know how to open an Emprex LM2201 or LM2202 monitor? There are no screws, including behind the label, and I don't see any plastic tabs around the perimeter.

    #2
    Re: Emprex (Innolux) 22" monitor - how to open?

    If there areno clips either it may be glued together.

    I use a block plane refill put it between the halves and whack with a hammer that's how I open glued power bricks barely leaves a mark anywhere.
    Elements of the past and the future combining to make something not quite as good as either.

    Comment


      #3
      Re: Emprex (Innolux) 22" monitor - how to open?

      http://www.usbchainsaw.com/

      Comment


        #4
        Re: Emprex (Innolux) 22" monitor - how to open?

        Originally posted by Harvey
        There are 10 kind of people in this world: those that understand binary, and those who don't.
        • ASUS ROG Maximus IX Code
        • Intel Core i5-7600K 3.8GHz
        • 16gb GSKILL TridentZ RGB DDR4-3200
        • 1 M2 SSD + 2 WD Blue 1TB (Mirrored)
        • Windows 10 Pro x64
        • GeForce GT1050
          2 x Acer KA240H + 1 Vewsonic VP2130 21 (a cap replacement job )

        Comment


          #5
          Re: Emprex (Innolux) 22" monitor - how to open?

          Originally posted by Krankshaft
          If there areno clips either it may be glued together.
          They glue together monitor cases???

          This is worse than my Nokia CRT monitor and its funny tabs. At least the Nokia isn't made of plastic that seems too brittle to bend.

          Comment

          Working...
          X