Westinghouse LCM-19w4

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • IRShifty
    Senior Member
    • May 2009
    • 78
    #1

    Westinghouse LCM-19w4

    This monitor would power on and off in a cycle, when I opened it up it had lots of swollen capacitors, I replaced them all with ones from digikey and now when I power it on the component in the picture starts hissing even when the power LED is off and when powered on the power LED will cycle on and off. When installing the new 22uf 50v I think some of the copper side of the board came off and I'm not sure if it is making a complete connection.
    Attached Files
    Tags: None
    • Nama
      Senior Member
      • May 2009
      • 127
      #2
      Re: Westinghouse LCM-19w4

      I have seen this also and can never pin point the exact source of the sound. I you do think the missing copper is a problem, use an exacto knife and scratch off the protective coating next to the Cap then bend over your terminal and re solder to the fresh copper making a direct contact. Good luck, Jacob
      ^Learning to walk on rice paper without leaving a trace,

        Comment

        • EGuevarae
          Badcaps Legend
          • Nov 2008
          • 1336
          • USA
          #3
          Re: Westinghouse LCM-19w4

          Originally posted by IRShifty
          ... the power LED will cycle on and off.
          SMPS detecting a short and resetting itself?
          Do as Jacob suggest to rule out a bad contact on that cap.
          Which caps did you replace? All of them? Same specs?
          There are 10 kind of people in this world: those that understand binary, and those who don't.
          • ASUS ROG Maximus IX Code
          • Intel Core i5-7600K 3.8GHz
          • 16gb GSKILL TridentZ RGB DDR4-3200
          • 1 M2 SSD + 2 WD Blue 1TB (Mirrored)
          • Windows 10 Pro x64
          • GeForce GT1050
            2 x Acer KA240H + 1 Vewsonic VP2130 21 (a cap replacement job )

            Comment

            • IRShifty
              Senior Member
              • May 2009
              • 78
              #4
              Re: Westinghouse LCM-19w4

              cant seem to make a solid connection with that capacitor. Its in such a small spot. I replaced all of them with same specs.

                Comment

                • EGuevarae
                  Badcaps Legend
                  • Nov 2008
                  • 1336
                  • USA
                  #5
                  Re: Westinghouse LCM-19w4

                  Originally posted by IRShifty
                  cant seem to make a solid connection with that capacitor. Its in such a small spot.
                  Next step: posta pic of the underside of the board, where the cap is soldered. Then we can figure something out.
                  There are 10 kind of people in this world: those that understand binary, and those who don't.
                  • ASUS ROG Maximus IX Code
                  • Intel Core i5-7600K 3.8GHz
                  • 16gb GSKILL TridentZ RGB DDR4-3200
                  • 1 M2 SSD + 2 WD Blue 1TB (Mirrored)
                  • Windows 10 Pro x64
                  • GeForce GT1050
                    2 x Acer KA240H + 1 Vewsonic VP2130 21 (a cap replacement job )

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • meraklinetx
                      Asus Z97-a power cycle, no boot no cpu voltage
                      by meraklinetx
                      Hello, I have an asus Z97-A motherboard and it doesn't start which was working properly before, the problem isn't related by ram, ram slots or psu (I changed all and nothing work), the exact problem is when you switch it on , it starts and after 1 seconds (no boot or display picture) it's off and then on cycle continuously until you power it off from psu also it's responding to the power switch for turning it off if you keep pressing it 3 or 4 seconds (power button pin has 3.3v) , also when you start it with eatx 12v socket connected this is happening (power cycle also all voltages are resetting...
                      05-10-2023, 06:08 AM
                    • spice_disc
                      Vizio TV M50-C1 reboot cycle and static on screen
                      by spice_disc
                      I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                      The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                      1 Photo
                      09-08-2024, 02:37 PM
                    • nono34
                      Hisense stuck in Colors cycle like test pattern.
                      by nono34
                      Hello,

                      I accidentally changed the project ID in the service menu of my Vidaa Hisense 100U7KQ TV. When I turn on the TV, the screen displays an RGB color cycle (test mode???). I contacted Hisense, and they sent me a usb_MTK_9618.EU.bin file, but it doesn't work. I can see that the USB drive is being read, and it flashes for about 10 minutes (the screen remains in the color cycle during the firmware reading), then the TV turns off and restarts, but still in the color cycle mode.

                      I want to mention that the 4GB USB is formatted in FAT32 MBR. I've also renamed the file to...
                      10-24-2024, 04:31 PM
                    • Yoda79
                      Samsung ue55nu7021k Boot cycle
                      by Yoda79
                      Hi, wondering if anyone can help with a tv which seems to turn on but turn off soon after and continue to do this cycle over and over again.

                      It turns on, no sound and then turns off and starts the whole cycle again. I've opened up the back and can see the backlights turning on. However when I disconnect the two straps connecting the left hard board (as you look on the back of the TV), the boot cycle stops and it does turn on and I can hear the boot up sound, however no video?

                      Any thoughts, any help would be greatly appreciated.​...
                      06-30-2024, 03:43 PM
                    • willoriker
                      motherboard power cycle MAX VI Gene
                      by willoriker
                      hi to everybody
                      i have a asus maximus VI gene with a power cycle, i made a lot of diagnostic, but i could found the problem
                      i check power sequence, all power source ( 5. 3.3 1.5 1.05, 3.3 cpu vmr) every is ok
                      without accesories ( no proc no ram nothing) mother start and keep working
                      when i insert cpu, mother boot up, post secuence start .. for 4 second post card show tipical info, and the power cycle begin.
                      some behavior . start post and restart. i test, replace bios with difernte version..... NOthing
                      try difernt powe supply, porcessor, anbd memories....
                      05-16-2023, 03:34 AM
                    • Loading...
                    • No more items.
                    Working...