Re: Broken Dell 1800FP Power Supply - when and when not to resolder?
Usually, it's the bad joints that cause the ICE2AS01 chip to short out. A quick test for this chip is to check for a short between pins 6 and 7 (Vcc and ground). Also, remember to resolder the pads of both duo diode paks and the main transformer.
Usually, it's the bad joints that cause the ICE2AS01 chip to short out. A quick test for this chip is to check for a short between pins 6 and 7 (Vcc and ground). Also, remember to resolder the pads of both duo diode paks and the main transformer.
Comment