ACER GD245HQ totally dead no power

[lotas]

Re: ACER GD245HQ totally dead no power

Hi,

What do you mean with "Heats up".

Every time I unplug the cord (not very often) the monitor doesn't turn up.
No blue led on near the switch, no image, not backlittle.

Normally it recovers after some time restarting the computer, but not this time (or I haven´t waited enough).

Any suggestion?

Thanks, much appreciated

It turned out to be the fault of the G966A (so-8) stabilizer near the power connector. It produces 1.25v per left percent, and while the cold one does not turn on. One has only to slightly warm it up (touch with a soldering iron, blow with a hairdryer) - immediately 1.25v appears at the output and the board starts up.

[willthrom]

Re: ACER GD245HQ totally dead no power

In my case I can hear windows detecting the monitor but it doesn't turn on.

In the Device Manager the Monitor is there, so somehow power is reaching...
For the last 8 month I never switch it off.. just leave it until it got into standby with PC is off.

I remember the switch button was not working very well either before...

[willthrom]

Re: ACER GD245HQ totally dead no power

[QUOTE=pixk;1013956]Thank you!

I will check the both G966A (I204 / I207).

For the BIOS file it's the I403 (MX25L1605DM2I-12G-GP) do you confirm ?

Mine is labeled "E6BF" :


any luck?

[willthrom]

Re: ACER GD245HQ totally dead no power

The problem with this monitor is often in the Regulator G966A (SO-8) when it heats up, the power can recover.

Hi,

What do you mean with "Heats up".

Every time I unplug the cord (not very often) the monitor doesn't turn up.
No blue led on near the switch, no image, not backlittle.

Normally it recovers after some time restarting the computer, but not this time (or I haven´t waited enough).

Any suggestion?

Thanks, much appreciated

[lotas]

Re: ACER GD245HQ totally dead no power

Yes, dump worker, downloaded from here:
https://****************/dump/mnt/gd245hq/12-1-0-18097

[pixk]

Re: ACER GD245HQ totally dead no power

Thank you!

I will check the both G966A (I204 / I207).

For the BIOS file it's the I403 (MX25L1605DM2I-12G-GP) do you confirm ?

Mine is labeled "E6BF" :

[lotas]

Re: ACER GD245HQ totally dead no power

The problem with this monitor is often in the Regulator G966A (SO-8) when it heats up, the power can recover.

[pixk]

Re: ACER GD245HQ totally dead no power

Hello,

My screen does not work after unplug from sector (no LED, no light, nothing). And after a random time, work again.

I have the same issue. I changed all caps on driver card (x14) and the two MKP X2 on power board. But issue is the same.

Could you please send me the BIOS file ?
why did you weld the IC I204 component ?

Thank you

[djserhatcom]

Re: ACER GD245HQ totally dead no power

Do you download bios?

[lepak06]

Re: ACER GD245HQ totally dead no power

I found the first problem it was the IC I204, i rehot it and the screen work.
But the screen is blank (white screen) i checked the voltage on tcon it was 2V (the normaly voltage is 5V) I unplug the panel cable voltage And now the Regulator I202 at the V_out i have 1V ( the normaly voltage is 3,3V) I checked the regulator it is ok.
Whithout this regulator ic i have on the Vout on the board 1V
For the regulator I203 , the V_out is ok with 3,3V

[lepak06]

Re: ACER GD245HQ totally dead no power

I join the service manual with schematic
And 2 photos of boards

[Mohamed Nabih]

Re: ACER GD245HQ totally dead no power

upload some pictures so we can help you

[lepak06]

Hello,

I have an ACER GD245HQ.
After unplug the AC cable et replug it the screen is totally dead.
No standby led and no power on when press power button.

I check the power supply board 5V and 22V are ok.

I try to reflash the eeprom MX25L1605A with an dump that i found it on web.
I check the 3 DC converters on main board it seem ok .
But always no power totally dead.

Have you an idea?

Thx