Apologies if this post should be somewhere else. I started this thread because I do not have the flashing or amber/green light as some others do.
Replaced all 2sc5707 trannies with genuine - [prior to that there was a very dim brief logo flash and power light steady green.]
Now I get a far brighter [its at normal??] logo flash - steady green light but otherwise situation is unchanged.
No signs of excess heat - fuses check ok and have resoldered inv. transformers and all electro caps.
As most of you seem far more technically adept than me, I would really appreciate some guidelines to tracing this no go fault.
Thanks
[Found 3 sources of very cheap 2sc5707 in Australia - if anyone wants info email me.]
Replaced all 2sc5707 trannies with genuine - [prior to that there was a very dim brief logo flash and power light steady green.]
Now I get a far brighter [its at normal??] logo flash - steady green light but otherwise situation is unchanged.
No signs of excess heat - fuses check ok and have resoldered inv. transformers and all electro caps.
As most of you seem far more technically adept than me, I would really appreciate some guidelines to tracing this no go fault.
Thanks
[Found 3 sources of very cheap 2sc5707 in Australia - if anyone wants info email me.]
Comment