IDEXX VetLab PN: 98-19386-00 .Lines on the screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • smaniak
    Senior Member
    • Nov 2017
    • 80
    • Bulgaria
    #1

    IDEXX VetLab PN: 98-19386-00 .Lines on the screen

    Hi I have a touch screen monitor. It work fine for many years, but now It shows its age!
    When I turn on the monitor, white lines appear on the display. They jump for a few seconds and then the display goes off.
    Can you give me some pointers on where to start with the diagnostics.
    There was a trail of dried light brown liquid on the board that the display connects to, as if a capacitor had leaked, but I couldn't find one. I cleaned the circuit board and resoldered the legs where this liquid was, but to no avail.
    Attached Files
    Last edited by SMDFlea; 05-04-2024, 03:42 AM. Reason: IDEXX PN: 98-19386-00
    Tags: None
    • SMDFlea
      Super Moderator
      • Jan 2018
      • 20276
      • UK
      #2
      Make and model number
      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • smaniak
          Senior Member
          • Nov 2017
          • 80
          • Bulgaria
          #3
          Originally posted by SMDFlea
          Make and model number
          IDEXX VetLab
          IDEXX PN: 98-19386-00​
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Stanley1843
              Screen Display Vertical Multicolor Lines
              by Stanley1843
              Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
              06-29-2024, 11:54 AM
            • turmix
              AOC U34G3XM, new monitor, black screen with backlight on, possible shortcircuit during dissassembly
              by turmix
              Hello, I'm working on a new deskmod pc project and have a problem with my monitor, an AOC U34G3XM, well, I may have bricked it.

              The monitor was dismanteled and the separate parts parts integrated in the desk. the screen panel alone is on the upper part, and main board/video board + power board on the back of the desk (not enough place on the cover to fit it)
              At first everything was working smoothly, then I decided to change the connexion between the video board and the screen for a longer one. Still working fine

              During another reassembly, I made a mistake, and...
              01-29-2024, 03:48 AM
            • jeyoung12
              Samsung QN50Q60t lines on screen
              by jeyoung12
              Hi all
              I have lines on the screen...which is an age old problem that can be remedied by watching Youtube videos and getting out the tape.
              My issue (after successfully fixing a different sammy tv with a separate tcon board and isolating the side of the panel...):

              This tv has an integrated tcon...so it is a bit more confusing when trying to isolate the clocks.
              It has a c ribbon and i have taken each end out to see if that will isolate the lines. instead, it makes it much worse ALL over the tv!

              So....i don't know what end of the C ribbon to work with...
              02-26-2024, 10:38 AM
            • jkruns
              M1 A2338 screen and touchbar issues after cleaning up liquid damage
              by jkruns
              Hello everyone,

              This is my first post after browsing this wonderful treasure trove of knowledge for many, many evenings. I've decided to learn how to fix these things, properly.

              My patient is an A2338 Macbook Pro M1 (late 2020).

              It had some corrosion around JT710 and JT700 caused by liquid spill, as well as against the protective barrier around the USB-C chips UF000 and UF100. So I took the main board out and cleaned it with a toothbrush and alcohol, then with alcohol in an ultrasonic cleaner. Cleaned the touchbar flex connectors as well. The board looks...
              04-22-2024, 06:45 AM
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • Loading...
            • No more items.
            Working...